🌐 English ▾
📞 Customer Line 24/7539 303 00 72
🌐 English ▾
Home›Blog›Crystal Shine and Maximum Protection on Floors: 90...

Crystal Shine and Maximum Protection on Floors: 904 YKP Surface Protector Guide

24.04.2026 Crystal Shine and Maximum Protection on Floors: 904 YKP Surface Protector Guide

Dolphinfix is a strong brand offering professional solutions in the fields of construction chemicals, concrete solutions, historical artifact restoration mortars, and heat, water, and sound insulation systems. With flexible sales options ranging from 1 kg to truck-based shipments, a wide product range, and fast supply advantages, it provides reliable solutions for individual applications up to large-scale construction site and industrial projects.

Ensuring that concrete floors have an aesthetic appearance, do not dust, and are resistant to external factors is among the top priorities of modern architecture and industrial facility management. Raw concrete is porous by nature and is prone to absorbing liquids, dusting, and abrasion. Stepping in right at this point, Dolphinfix 905 YKP Surface Protector and Polish gives your floors not just a layer, but almost an armor and a crystal radiance.

In this article, we will examine in detail what the 904 YKP product, which revolutionized floor technologies, is, where it is used, and the application subtleties down to the finest detail.

What is 904 YKP? The Power of Crystalline Protection

Dolphinfix 904 YKP is a solvent-based, transparent surface protector and polishing coating material that penetrates deeply into the uppermost layer of the applied surface. What sets it apart from ordinary polishes is that it does not just stay on the surface, but penetrates the texture of the concrete to initiate a chemical reaction.

Chemical Reaction and Crystallization

When 904 YKP enters the pores on surfaces such as concrete, plaster, or joints, it initiates a reaction and crystallizes. This crystallization process fills microscopic voids on the surface, making the concrete impermeable and smooth. Thanks to its solvent-based formula, it dries much faster than water-based products and provides a sharper gloss.

904 YKP Areas of Use: Where Should It Be Preferred?

Dolphinfix 904 YKP offers professional solutions on all horizontal and vertical surfaces where high durability and aesthetics are expected.

  • Parking Lot and Warehouse Floors: Prevents tire marks and wear in areas with heavy vehicle traffic.
  • Industrial Areas: Increases mechanical resistance on floors where loading and unloading are performed.
  • Stores and Showrooms: Provides a vibrant and glossy floor appearance that will attract customers' attention.
  • Precast Facades: Provides protection against climatic conditions in reinforced concrete exterior cladding.
  • All Concrete Surfaces: Safely used in exposed concrete, screed, and joint-filled areas.

Advantages of 904 YKP Surface Protector and Polish

Why should you use Dolphinfix 904 YKP in your project? Here are the unique advantages this product offers:

  • Glossy and Vibrant Appearance: Gives the floor a "wet look" effect, revitalizing colors and providing high gloss.
  • Strictly Prevents Dusting: Stops particle separation of the concrete to create a dust-free environment.
  • Abrasion and Friction Resistance: Strengthens the floor against mechanical impacts, minimizing scratches.
  • Liquid Repellency: Lowers water absorption capacity, preventing oil and dirt from penetrating into the concrete.
  • Breathable Surfaces: Does not disrupt the natural balance of the concrete as it is water vapor permeable.
  • Easy Cleaning: Significantly reduces cleaning costs and time thanks to its smooth surface.

How is Pre-Application Floor Preparation Done?

A successful polishing process passes through correct floor preparation. The following steps must be followed before 904 YKP application:

Cleaning and Purification

It must be ensured that the floor is completely cleaned of oil, dirt, dust, and any old paint residues. Application made on a dirty surface limits the crystallization feature of the product.

Moisture Balance

Critical Warning: YKP 904 application must be made on a damp floor. During periods when air temperatures are high, the floor must be completely saturated with water before application. However, there must definitely be no standing water (puddling) on the surface.

904 YKP Application Technique and Stages

Dolphinfix 904 YKP application is a simple yet attention-requiring process.

  • Temperature Control: During application, the outside ambient temperature must be greater than 2 °C, and the surface temperature greater than 5 °C.
  • Method: The product can be applied to the surface by roller, brush, or low-pressure spraying methods.
  • Consumption: Approximately 0.05-0.10 liters per m² for troweled concrete. This rate may vary depending on the absorbency of the concrete.
  • Waiting Between Coats: Two-coat application is generally recommended on absorbent surfaces. At +5 °C: Wait at least 3.5-4 hours between coats. At +25 °C: Wait at least 1.5-2 hours between coats.
  • At +5 °C: Wait at least 3.5-4 hours between coats.
  • At +25 °C: Wait at least 1.5-2 hours between coats.

Technical Data Table

Technical details for professional teams:

Feature | Detail
Content | Solvent-Based Resin
Appearance | Transparent Liquid
Density | 0.92 ± 0.02 (g/cm³)
Consumption | Between 5-20 m² per 1 Liter
Shelf Life | 24 Months
Packaging | 30 Kg Plastic Drum

Important Considerations

  • Frozen Surfaces: Application must never be made on frozen or icy surfaces.
  • Aggregate Exposure: If the floor is excessively worn and aggregates are completely exposed, the product's performance may not be at the expected level. In this case, Dolphinfix technical service should be consulted.
  • Color Difference: Differences in absorbency in different regions of the concrete can cause very slight tone differences. This is a natural process.

Safety and Storage

Since 904 YKP contains solvents, smoking, food, and beverages should not be consumed during application. The workspace must be ventilated. The product should be stored between +5 °C and +30 °C, away from direct sunlight.

Why Dolphinfix 904 YKP?

Dolphinfix offers the most durable formulas with years of experience in floor protection technologies. 904 YKP is not just a polish, but a professional maintenance product that extends the life of concrete. Protecting the floor of your warehouse, store, or parking lot means protecting the prestige of your brand.

Contact Us for the Amount of Product You Need!

Dolphinfix offers reliable supply and technical support in construction chemicals, concrete solutions, insulation systems, and special mortar groups, ranging from packaging options starting from 1 kg to pallet, tonnage, and truck-based industrial deliveries. For detailed information and quotes, you can visit www.dolphinfix.com.tr or contact our sales representatives.

📞(0212) 945 00 59

Get a quote for bulk purchases