🌐 English ▾
📞 Customer Line 24/7539 303 00 72
🌐 English ▾
Home›Blog›Ceramic Adhesive Guide: Professional and Permanent...

Ceramic Adhesive Guide: Professional and Permanent Solutions with D FIX 1200

07.05.2026 Ceramic Adhesive Guide: Professional and Permanent Solutions with D FIX 1200

Dolphinfix is a strong brand offering professional solutions in the fields of chemical construction products, concrete solutions, historical artifact restoration mortars, and heat, water, and sound insulation systems. With flexible sales options ranging from 1 kg to truckload shipments, a wide product range, and fast supply advantages, it provides reliable solutions for individual applications as well as large-scale construction and industrial projects.

Ceramic and tile applications, which are indispensable for interior designs in modern architecture, gain value not only through their aesthetic appearance but also through application quality. The lifespan of a ceramic tile depends less on the covering material used than on the quality of the adhesive bonding it to the floor. At this point, Dolphinfix construction chemicals offer a superior-than-standard experience to construction professionals and end users with D FIX 1200 – Tile and Ceramic Adhesive.

In this article, we will examine the factors to consider when choosing a ceramic adhesive, the importance of TS EN 12004 standards, and the technical details behind the frequently asked question, "Can ceramic be glued onto ceramic?"

Why Should We Look at Standards When Choosing Ceramic Adhesives?

Every product used in the construction sector must have a specific quality certification. For ceramic adhesives, this reference point is the TS EN 12004 standard. When you see this code on a product, you understand that it has been tested in a laboratory environment and possesses a certain strength capacity.

What Does the C1T Standard Mean?

D FIX 1200 is manufactured in the C1T class according to TS EN 12004 standards. So, what does this technical code represent?

C1 (Normal Performance)

Indicates that the adhesive is cement-based and offers standard bond strength. It is an ideal binder for indoor ceramic and tiles with a high water absorption rate.

T (Reduced Slip)

This is where the Dolphinfix difference begins. The letter "T" (Thixotropic) symbolizes the adhesive's strength in holding ceramic tiles during vertical applications (on walls). When doing wall tiling with D FIX 1200, your ceramics do not slide downward, which provides great ease of workmanship for the master applicator.

D FIX 1200: The Economical and Powerful Hero of Interiors

Developed by Dolphinfix, D FIX 1200 is specifically formulated for floor and wall applications of medium and small-sized ceramics indoors.

Why Choose D FIX 1200?

1. High Bonding Strength

Thanks to its cement-based hydraulic binder structure, it grips firmly onto the surface it is applied to.

2. Washed and Dried Silica

As with all Dolphinfix products, pure silica sand is used inside D FIX 1200. This increases the strength of the mortar while preventing cracking.

3. Easy Workability

Thanks to its slippery and soft consistency, combing is done very easily and does not fatigue the user.

4. Economical Solution

Delivers high performance at the most affordable cost for standard indoor projects.

Can Ceramic Be Glued Onto Ceramic? (Floor Preparation Guide)

One of the most frequently asked questions is: "Can I glue new tiles over old tiles without breaking them?"

Our answer: Yes, but with the right method. By nature, ceramics are shiny and non-absorbent surfaces. If you apply a standard adhesive directly onto them, it will "pop off" after a while. This is where surface preparation and the correct primer come into play.

Step-by-Step Tile-Over-Tile Application

If you want to renovate your old ceramics without breaking them, you should follow these steps:

Cleaning

The existing floor must be cleared of all kinds of oil, dust, and dirt. No adhesive can perform at its best on a dirty surface.

Primer Application (SER 730)

This is the critical point. SER 730 – Tile-Over-Tile Primer must be used. This primer creates a rough texture on the shiny surface, forming a "tooth" for the adhesive to grip onto.

Primer Application Method

After opening the lid of SER 730, it is mixed for 1 minute (no water is added). It is applied with a roller or brush.

Bonding

When the primer dries and is no longer tacky to the touch (approximately 3-6 hours later), you can safely lay your new ceramics using D FIX 1200.

D FIX 1200 Technical Specifications Table

For a professional, technical details are everything. The laboratory data for D FIX 1200 is as follows:

Feature | Value
Appearance | Gray and White Powder
Application Temperature | Between +5 °C and +35 °C
Pot Life | 5 Hours
Open Time | At least 30 min. (≥0.5 N/mm²)
Slip (T) | ≤0.5 mm
Reaction to Fire | A1 (Non-combustible)
Temperature Resistance | -40 °C to +80 °C

Application Method and Points to Consider

Application steps recommended by Dolphinfix experts for a perfect result:

1. Mixing

Pour the specified amount of water into a clean bucket. Slowly add the 25 kg package of D FIX 1200. Mix with a low-speed mixer until a lump-free, homogeneous mixture is obtained. Let the mortar rest to mature for 5-6 minutes, then mix for another 1-2 minutes to make it ready for use.

2. Application

Spread the prepared mortar onto the surface and comb it with a notched trowel suitable for the size of the ceramic. Adhere the ceramics onto the combed mortar within 25 minutes. After the bonding process, evacuate air pockets using a rubber mallet and check surface flatness.

3. Final Touch: Joint Grouting

After the application is completed, wait at least 24 hours for the ceramics to fully fix. At the end of this period, joint grouting can proceed.

Building the Future with Dolphinfix

Our production philosophy as Dolphinfix is not just to sell products, but to offer permanent solutions that extend the lifespan of buildings. D FIX 1200 is a "true-to-its-nature" ceramic adhesive with washed silica sand and high-quality polymer additives. Its structure, which does not compromise quality for economic concerns, has made it a reliable brand both in Turkey and in the international market.

Bring the power of standards to all your interior tile and ceramic works. Glue with Dolphinfix, enjoy peace of mind for a lifetime.

Contact Us for the Quantity of Product You Need!

From packaging options starting at 1 kg to pallet, tonnage, and truckload-based industrial deliveries, Dolphinfix offers reliable supply and technical support in chemical construction products, concrete solutions, insulation systems, and special mortar groups. For detailed information and quotes, you can visit www.dolphinfix.com.tr or contact our sales representatives.

📞(0212) 945 00 59

Get a quote for bulk purchases