Pool Waterproofing Materials Guide: Lifelong Protection with Dolphinfix
11.05.2026
Dolphinfix is a strong brand offering professional solutions in the fields of construction chemicals, concrete solutions, historical artifact restoration mortars, and heat, water, and sound insulation systems. With flexible sales options ranging from 1 kg to truck-based shipments, a wide product range, and fast supply advantages, it provides reliable solutions for individual applications as well as large-scale construction site and industrial projects.
In pool construction, there is a single issue that is as important as aesthetics, and perhaps even more critical: pool water insulation. Insulation that is not applied correctly leads not only to water loss but also to the internal decay of the pool's reinforced concrete structure and irreparable material damage. In this article, we will examine in detail the structural challenges of pools and the professional solution proposals offered by the Dolphinfix brand.
What Is Pool Water Insulation and What Are We Protecting?
When pool water insulation is mentioned, people usually think only of "preventing water leakage." However, the situation is much more complex. When performing pool insulation, we are actually fighting three main enemies.
Reinforced Concrete Structure and Rebar Reinforcement
When pool water passes through the capillary veins in the concrete and reaches the rebar reinforcement, corrosion, meaning rusting, begins. Rusted iron swells, cracks the concrete, and weakens the load-bearing system of the pool.
Water Pressure
The static pressure generated by thousands of tons of water constantly pushes the insulation layer outward.
Freeze-Thaw Effect
Water seeping into the concrete expands when it freezes in winter. This expansion bursts the structure of the concrete and increases leakage by enlarging capillary voids.
Does Pool Concrete Let Water Through?
It must be definitely known that concrete is not a water-impermeable material. Concrete is a structure consisting of a combination of aggregate, cement, and water. While water evaporates during the reaction, it leaves millions of microscopic channels and voids inside the concrete. The water inside the pool seeps out through these capillary paths. Therefore, water insulation in pools is not a luxury, but a technical necessity.
When Does Pool Water Insulation Begin and Where Is It Applied?
Pool insulation does not begin when the ceramic stage is reached, but while the foundation concrete is still being poured. For a pool to be under full protection, the following areas must definitely be insulated:
Foundation and Curtain Concretes
Must be protected both from the inside and the outside.
Overflow Channels
These are critical areas where water constantly recirculates.
Mechanical Room and Machine Rooms
Water tightness is of critical importance for the protection of equipment.
Pool Surroundings
All walking areas in contact with water must be protected.
Professional Pool Water Insulation Materials and Application Steps
As Dolphinfix, we view pool insulation like a security system. Just as you lock, encrypt, and protect the safe in your home, a pool must also be protected layer by layer.
1. Internal Strengthening of Concrete: LIGUIT CRYSTALIZE CRY 610
Insulation begins while the concrete is still being poured. LIGUIT CRYSTALIZE CRY 610 is a liquid crystallized water-impermeability admixture added into the concrete. It closes the capillary voids within the concrete by forming crystals.
Important Note
This admixture alone is not sufficient for a pool. It may be sufficient in residential foundations, but in high-pressure areas like pools, it must definitely be supported with brush-applied insulation systems.
2. Surface Preparation and Repair: D TH HTH 1107
Surface preparation before insulation is of vital importance. Tie rods, wood wedge voids, and segregated areas must be cleaned and then repaired with D TH HTH 1107 hydrophobic repair mortar.
Advantages
- Provides high resistance against water
- Does not shrink
- Offers high adhesion
3. Super Flexible Protection: KRISTEKS 2KS 101
Due to the intense water pressure inside the pool, products with high elasticity must be used. KRISTEKS 2KS 101 stands out with its double-component and super-flexible structure.
Critical Information
If only brush-applied insulation is to be done, the product must definitely be applied with mesh reinforcement.
4. Maximum Security: 2223 Textile Membrane and D FIX FLEX 1250
In professional applications, 2223 Textile Membrane is applied as a top coat over two coats of KRISTEKS 2KS 101 application. This system provides maximum water impermeability.
Adhesive Selection
To ensure the textile membrane adheres strongly to the surface, D FIX FLEX 1250 professional adhesive with high adhesion must be used.
5. Under-Plaster and Over-Plaster Adhesion Strength: LATEKS LTX 620
LATEKS LTX 620 should be added to the mortar while preparing the pool plaster. This admixture;
- Ensures the plaster grips the concrete more strongly
- Reduces crack formation
- Increases water impermeability
Water Pressure and the Behavior of Water in the Pool
Pool water is not just a static mass. Filling-emptying operations, temperature changes, and the movement of water constantly strain the reinforced concrete structure.
Cold Joint Problem
Especially in cold joint areas, meaning areas where concrete is poured at different times, water finds the smallest gap and seeps through. Therefore, TPE-based expansion joint tapes should be applied to cold joints and supported with D TH HTH 1107.
Frequently Asked Questions
What happens if water insulation is not done in a pool?
Water seeping into the concrete breaks down the concrete through the freeze-thaw effect. Reinforcement bars rust, and the structural lifespan of the pool is severely shortened.
Should brush-applied insulation or membrane be preferred?
The safest method is the hybrid system. Dolphinfix 2223 Textile Membrane applied over KRISTEKS series brush-applied insulation provides maximum protection.
What is the difference between positive and negative insulation?
Application made from the side where water comes from, meaning from inside the pool, is positive insulation. Protection made from the outside of the pool is called negative or external protection. Protection made from both sides significantly extends the lifespan of the pool.
Conclusion: Why Dolphinfix?
Pool insulation accepts no mistakes. Water can find the smallest gap, seep into the reinforced concrete structure, and cause major structural problems over time.
The Dolphinfix product group offers an integrated protection shield ranging from concrete admixtures to repair mortars, from brush-applied insulations to textile membrane systems. Thanks to its professional product structure, high durability, and long-lasting performance, it provides reliable solutions in pool projects.
Contact Us for the Quantity of Product You Need!
From packaging options starting at 1 kg to pallet, tonnage, and truck-based industrial deliveries, Dolphinfix provides reliable supply and technical support in construction chemicals, concrete solutions, insulation systems, and special mortar groups. For detailed information and quotes, you can visit www.dolphinfix.com.tr or contact our sales representatives.
📞(0212) 945 00 59