🌐 English ▾
📞 Customer Line 24/7539 303 00 72
🌐 English ▾
Home›Blog›Protective Armor for Buildings with D-THERM 1701 D...

Protective Armor for Buildings with D-THERM 1701 DTS: Thermal Insulation Board Plaster Guide

09.04.2026 Protective Armor for Buildings with D-THERM 1701 DTS: Thermal Insulation Board Plaster Guide

Dolphinfix is a strong brand offering professional solutions in the fields of construction chemicals, concrete solutions, historical artifact restoration mortars, and thermal, water, and sound insulation systems. With flexible sales options from 1 kg to truckload shipments, a wide product range, and fast supply advantages, it provides reliable solutions from individual applications to large-scale construction site and industrial projects.

Thermal insulation is not an ordinary construction item to be done "by chance" or with a "good enough" mindset. On the contrary, it is an application that requires engineering precision, protecting both our buildings and us living inside them. In our previous article, we examined the board bonding process, which is the foundation of insulation, and the vital role of D-THERM Y 1700 DTY in this process. However, it should not be forgotten that bonding is not enough; the board needs to be armored.

Many users think that most of the work is done when the insulation board is bonded to the wall. Yet, that board is completely vulnerable to the outside world unless a proper armor layer is applied over it. At this exact point, D-THERM 1701 DTS Thermal Insulation Board Plaster, which acts as the "external protection shield" of the system, comes into play.

Introduction: The Protective Layer of the Armor – Why Must We Protect the Boards?

The most basic function of thermal insulation boards (EPS, XPS, Rock Wool) is to prevent heat transfer. However, there is a single condition for these materials to perform: staying dry.

The Destructive Effect of Moisture

An insulation material that remains wet or damp loses its thermal insulation property. In fact, wet material conducts heat faster, starting to make us "colder" instead of protecting our building.

Fighting Against Natural Conditions

We perform insulation to protect our buildings not only from the cold of winter, but also from the scorching heat of summer, heavy rain, and the abrasive effect of wind.

UV and Sulfate Threat

Thermal insulation panels (especially EPS) are sensitive to UV rays coming from the sun; if left exposed for a long time, their surfaces yellow and start to crumble. In addition, atmospheric sulfates and chemical effects can disrupt the board structure.

To overcome all these negative factors, we need to dress the insulation panels with a mesh-reinforced "shirt" or a sturdy "raincoat." D-THERM 1701 DTS is the main material of this armor with its cement-based, polymer-modified, and enriched content.

Bonding Is Not Enough, It Must Be Armored

In the ETICS (External Thermal Insulation Composite System), the adhesive is the force bonding the board to the building. The plaster, on the other hand, is the layer binding the board to life. After a strong bonding process, we must save the surface from UV rays, mechanical impacts, and the infiltration effects of water.

Why Should We Plaster with 1701 DTS?

Impact Resistance

The exterior facade of the building is exposed to physical impacts. Having a flexural strength of 2 N/mm² and a compressive strength of 6 N/mm², this plaster layer absorbs impacts and protects the board.

Excellent Infrastructure

It forms a flawless foundation with an adhesion strength of ≥ 0.5 N/mm² for the decorative coating or paint to be applied on top.

Full Resistance to Weather Conditions

With a low water absorption value of ≤ 0.5 kg/m².min⁰⁵, it keeps the rain out while allowing the structure to breathe thanks to its vapor permeability.

What Is Thermal Insulation Board Plaster? A Protector Engineered Product

When thermal insulation is mentioned, the first products that come to mind are boards such as EPS, XPS, or 1950 – GOLD Heat and Sound Insulation Barrier. Since these are petroleum-derived products, standard cement-based mortars cannot hold onto these surfaces. Standard products cannot provide adhesion compliance and separate from the board like a "shell" over time.

D-THERM 1701 DTS is not an ordinary mortar; it is a special shield. Thanks to the roasted silica sand, rich polymers, and special fiber reinforcement it contains, it clings to the board at the molecular level.

The Importance of Fiber Reinforcement (Mesh)

The answer to the question "Why is normal mortar not used?" is flexibility. The insulation system constantly "moves" according to temperature differences.

Crack Resistance

Fiber strands bridge shrinkage cracks during drying.

Flexibility

It moves together with the board against thermal shocks, preventing the system from falling apart.

The Art of Application: How Is D-THERM 1701 DTS Applied?

After the thermal insulation boards are bonded and anchored (6 pieces per m²), the armoring phase begins.

1. Preparation and Mixing

6-7 liters of water are put into a clean bucket. 25 kg DTS 1701 is slowly emptied and mixed with a low-speed mixer until it becomes lump-free. After resting for 3-4 minutes, it is mixed again and made ready.

2. Application and Mesh Reinforcement

Combing

It is applied on the board at a thickness of approximately 4 mm with a 10x10 mm notched trowel.

Embedding Technique

Alkali-resistant reinforcement mesh weighing 160 g/m² is embedded while the plaster is still wet, close to the exterior facade (1-1.5 mm depth from the surface).

Overlapping

Meshes must overlap by 10 cm at joints.

3. Second Coat of Plaster

Once the mesh is completely covered, the surface is leveled. This layer creates the appropriate ground for the decorative topcoat application or PAR 710 – DECORATIVE PLASTER UNDERCOAT AGENT.

Application Errors: If You Don't Do It, It Cracks

Mesh Error

Meshes with low alkali resistance melt in the cement, and the system cracks remaining unreinforced.

Weather Conditions

Application temperature must be between +5 °C and +30 °C. Plaster applied under direct sunlight "burns" and pulverizes.

Waiting Periods

Full curing (2-3 days depending on weather conditions) must be awaited between coats and before the topcoat.

Summary of Technical Specifications (Compliant with TS 13687 Standards)

  • Adhesion to Substrate: ≥ 0.5 N/mm²
  • Polystyrene Adhesion: ≥ 0.08 N/mm²
  • Reaction to Fire: A1 (Non-Combustible)
  • Water Vapor Permeability: ≤ 15 µ
  • Compressive Strength: ≥ 6 N/mm²

Conclusion: Aesthetic and Technical Assurance of Your Building

Fixing the thermal insulation board to the wall is half the job; bonding it to life is possible with D-THERM 1701 DTS. Prepared with Dolphinfix quality, this meshed plaster layer protects your building not only from heat and cold, but also from impact, wind, and time. Choose the right armor for facades that do not crack, do not shed, and maintain their first-day aesthetics for years.

Contact Us for the Amount of Product You Need!

Dolphinfix offers reliable supply and technical support in construction chemicals, concrete solutions, insulation systems, and special mortar groups, ranging from packaging options starting from 1 kg to pallet, tonnage, and truckload-based industrial deliveries. For detailed information and quotes, you can visit www.dolphinfix.com.tr or contact our sales representatives.

📞 (0212) 945 00 59

Get a quote for bulk purchases