Ultimate Solution in Waterproofing: Safety from Foundation to Roof with SUPER PLUS S2K 160
06.03.2026
Dolphinfix is a powerful brand offering professional solutions in the fields of construction chemicals, concrete solutions, historical artifact restoration mortars, and thermal, water, and sound insulation systems. With flexible sales options from 1 kg to truckload shipments, a wide product range, and fast supply advantages, it provides reliable solutions for individual applications as well as large-scale construction site and industrial projects.
Waterproofing is not only a structural necessity of modern construction projects, but also the most critical element determining the longevity, indoor comfort, and structural safety of a building. Incorrect material selection or faulty application can lead to difficult-to-compensate and high-cost corrosion problems over time, the formation of mold and fungi, and ultimately structural damage.
Today, technology has evolved into hybrid technologies that exhibit superior performance compared to traditional roll membranes. Representing the pinnacle of this technology, the Bitumen-Acrylic combination and two-component (2K) systems are accepted as the "gold standard" in both professional projects and residential renovations.
In this comprehensive guide, we will discuss in detail the technical anatomy of the SUPER PLUS S2K 160 waterproofing material, its anti-root resistance against plant roots, application techniques, and long-term economic advantages.
Why Bitumen-Acrylic Combination? (The Power of Hybrid Technology)
Bitumen and acrylic are two giants in the waterproofing world. However, they exhibit limited performance when used alone. Bitumen provides superior water impermeability but is sensitive to temperature changes; it can flow at high temperatures and become brittle at low temperatures. Acrylic polymers, on the other hand, provide high elasticity and UV resistance.
The coming together of these two materials (hybrid technology) is the most perfect solution for those seeking both high strength and extraordinary flexibility in insulation. Here are the technical reasons behind this synergy:
1. Extraordinary Flexibility and Crack Bridging
Reinforced concrete structures are in a state of continuous micro-movement due to static loads, wind, or temperature differences. Pure bitumen cannot adapt to these movements, and cracks occur. The bitumen-acrylic mixture, however, can bridge micro-cracks (up to 2 mm) formed on the concrete surface due to the settlement of the building. The insulation layer does not tear; it stretches like chewing gum and moves together with the structure.
2. UV Resistance and Thermal Stability
Pure bitumen (pitch) dries, hardens, and cracks over time when exposed to sunlight (UV). Acrylic addition covers this weak point of bitumen. It slows down the aging process of the product, prevents it from flowing at high temperatures, and prevents it from becoming brittle at low temperatures. This feature extends the life of the material, especially in terrace applications.
3. Superior Adhesion to Damp Surfaces (Bond Strength)
Traditional bituminous membranes require the surface to be completely dry. However, in construction site conditions, especially in foundation waterproofing, this is not always possible. Acrylic-modified bitumens adhere to the surface with a chemical bond. They provide a very strong adhesion (bond strength) without blistering even on slightly damp surfaces.
4. Chemical and Biological Resistance (Anti-Root Property)
Bitumen is an organic substance and can be perceived as a nutrient source by some plant roots. Formulas enriched with acrylic and special polymers (such as SÜPER PLUS S2K 160) create a physical and chemical barrier against plant roots. Thanks to this combination, the product both performs waterproofing and acquires root-protected (anti-root) features.
What is S2K? Anatomy of Two-Component (2K) Systems
While there are many single-component (ready-bucket) products in the market, understanding why S2K (Two-Component) systems are preferred in professional projects is a technical necessity.
S2K comes from the German term "2-Komponenten" and indicates that the product consists of two separate packages that need to be mixed at the time of application. Specifically for SUPER PLUS S2K 160, this structure is as follows:
• Component A (Liquid): Bitumen-rubber and acrylic-based liquid emulsion. (22 kg) • Component B (Powder): Reactive fillers and special cement-based hardener. (8 kg)
When these two components are mixed at the time of application, not only drying but also a chemical curing process begins.
Advantages Over Single-Component Systems
- Fast Drying and Moisture Resistance: Single-component products dry only through the evaporation of water. In humid weather, the center of the product may remain wet. S2K 160, on the other hand, dries faster thanks to the chemical reaction independently of air humidity and becomes resistant to rainwater in a short time.
- Fill Thickness and No Shrinking: Single-component products lose volume and thin out as they dry. Component B (powder) traps the liquid component. The applied thickness is largely preserved. This provides W1 class water impermeability.
- Mechanical Resistance: Combines the flexibility of bitumen-rubber with the hardness of cement. It is a resistant layer that does not crush when backfilled.
Effect of Plant Roots on Structural Concrete: Hidden Danger
In landscape architecture and green roof applications, plant roots have a much stronger and more destructive force than it appears.
1. Mechanical Effects (Physical Pressure)
Roots generally do not pierce through the concrete itself. However, they infiltrate micro-cracks, joint spaces, or voids in the concrete. As the root grows, the radial pressure it exerts increases and splits the crack like a wedge. Additionally, tree roots can get under concrete slabs and push the concrete upward over time.
2. Chemical Effects
Plant roots release organic acids into the soil during nutrient uptake. These acids can react with the calcium carbonate inside the concrete, causing the concrete to soften. The paths opened by the roots make it easier for water to reach the steel reinforcement (rebar) inside the concrete. Rusted iron expands and bursts the concrete from the inside.
3. Anti-Root Technology
SUPER PLUS S2K 160 is tested according to TS EN 14416 standards. This technology contains special additives that pacifize the growth hormones (auxin) at the root tips but do not harm the plant overall. While the plant continues to grow healthily, only its aggressive downward growth is restricted.
Criticality of Insulation in Green Roofs and Terrace Gardens
Green roofs are the most challenging test areas for insulation. In many projects, the preference for traditional membranes leads to problems that are very difficult to compensate for over time.
Disadvantages of Standard Membranes (Rolled/Torch-Applied)
- Lap Joint Risk: Roll membranes are applied with 10-15 cm overlaps (lap joints). Lap joints are always open to the risk of junction failure.
- Water Migration Risk: If the membrane does not fully adhere to the surface, water can travel kilometers between the membrane and the concrete in case of a possible puncture. Locating the leak becomes impossible.
"Infinite Insulation" with SUPER PLUS S2K 160
Since S2K 160 is a liquid-applied system, it closes all gaps of traditional methods. It forms a single-piece, jointless, and seamles film layer on the surface. It eliminates the concept of "lap joints." The entire terrace becomes a single piece (monolithic) from corner to corner.
Application Guide: Surface Preparation and Step-by-Step Application
The golden rule in waterproofing is: "The product determines the quality of the insulation, and the surface preparation determines its lifespan."
1. Surface Remediation (Dolphin HTH 1107)
Defects formed during concrete pouring act as highways for water to seep into your building. Void areas and cold joints must definitely be closed. These opened voids must be filled with Dolphinfix HTH 1107 – Hydrophobic Repair Mortar, which has high strength and water-repellent properties.
2. Critical Detail: Coving Application (Dolphin TH)
Waterproofing layers tend to break at 90-degree right angles. Curtain wall-parapet and wall-floor junctions must definitely be coved (rounded) with Dolphin TH series repair mortars, and mesh reinforcement must be made in this area.
3. Priming (BITUMEN PRIMER DBA 163)
After the surface is repaired, DBA 163 Polymer Modified Bitumen Primer comes into play to trap the dust on the surface and make S2K 160 adhere to the ground like a "magnet."
Mixing and Application Techniques
Technical master knowledge is required to get full performance from SUPER PLUS S2K 160.
1. Brush Application (First Coat)
Using an Izmir brush (bitumen brush) in the first coat application is the most correct approach to work the product into the microscopic rough and porous structure of the concrete.
2. Trowel Application (Retaining Walls)
Especially in foundation retaining walls, more than a standard film layer, i.e., thickness, is required. The trowel allows the product to be left on the surface at a higher grammage in a single go.
3. Spray Application (Speed)
Airless spray guns atomize S2K 160 with high pressure and spray it onto the surface. This is unique for narrow spaces and large areas that are impossible to reach by hand. It shortens the labor time by up to 70%.
Use of Reinforcement Mesh: When Should It Be Applied in 3 Coats?
Reinforcement mesh is the skeleton of the insulation.
• 2-Coat Application: Sufficient in low-risk areas such as wet areas (bathrooms, WCs). • 3-Coat and Meshed Application: Mandatory for green roofs, terrace gardens, and foundations with high groundwater levels.
Meshed Application Technique:
- Apply the first coat.
- While still wet, lay the mesh on the surface and embed it with a trowel.
- Overlap the meshes by at least 10 cm at the joints.
- Trap the mesh by applying the second coat.
Frequently Asked Questions and Technical Warnings
Can application be made in rainy weather?
No. Since S2K 160 is water-based, rain falling before the product completes its full curing can wash the product away. A rain-free weather of at least 12 hours must be waited after application.
Is the product diluted with water?
Absolutely not. The elasticity and resistance to pressurized water (W1 class) of a product diluted with water are lost.
Can ceramic be tiled on top?
Yes. However, high-elasticity adhesives (S1 or S2 class) that can adhere to the bitumen surface must be used.
Cost and Performance Balance: Long-Term Economic Contribution
Real cost is not the product price, but its lifespan and maintenance cost. S2K 160 prevents water migration thanks to its full adhesion feature, and in case of damage, only that point is repaired. This eliminates thousands of liras of demolition and rebuilding costs. By extending the corrosion life of the building, it prevents millions of liras of reinforcement costs that may occur in the future.
Contact Us for the Amount of Product You Need!
Dolphinfix offers reliable supply and technical support in construction chemicals, concrete solutions, insulation systems, and special mortar groups, ranging from packaging options starting from 1 kg to pallet, tonnage, and truck-based industrial deliveries. For detailed information and quotes, you can visit www.dolphinfix.com.tr or contact our sales representatives.
📞 (0212) 945 00 59