🌐 English ▾
📞 Customer Line 24/7539 303 00 72
🌐 English ▾
Home ›Restoration Solutions ›1140 DSW D-SİL WB Water-repellent Water-based EMPR...

1140 DSW D-SİL WB Water-repellent Water-based EMPRENYE MALZEMESİ

1.045,55 ₺
Prices do not include %20 VAT; it is added at checkout.

1140 DSW D-SIL WB is a water-based, environmentally friendly, odorless special impregnation material.

KG:
📞 Request a quote for bulk / pallet purchases
🚚 Fast Shipping
🛡️ Secure Payment
↩️ Easy Returns
** PLEASE CONTACT FOR PALLET PRICES.** PRODUCT INFORMATION ; DESCRIPTION 1140 DSW D-SIL WB is a water-based, environmentally friendly, odorless special impregnation material. AREAS OF USE It is used as a hydrophobic impregnant on mineral-based building materials such as historical artifact facade coatings, natural stone, brick walls, and on lightweight concrete surfaces. PRODUCT FEATURES AND ADVANTAGES *Excellent water repellency, *Does not stain exterior facades, *Does not change the appearance, *Vapor permeable, *Resistant to alkalis and UV rays, *Safe application, *Solvent-free, *Environmentally friendly. TECHNICAL SPECIFICATIONS Material composition: Alkylsiloxane Color: White Density: 1.00 g/cm³ Drying time: 60 minutes Application ambient temperature: +10°C to +25°C Application method: Spray, roller, brush Consumption: 0.20–1.0 L/m² (depending on surface absorbency and type) (test application on a small area is recommended) APPLICATION METHOD SURFACE PREPARATION *The application surface must be sound, free of anything that prevents adhesion, dry, dust-free and clean. *The surface must be thoroughly cleaned of all oil, grease and rust residues that would reduce adhesion, and there must be no loose particles on the surface Mixing It should be mixed for approximately 3 minutes in a clean container or in its own packaging with a low-speed drill. The material, which is ready for use, is applied to the surface with a spray device, roller, or brush until saturated. 1140 DSW D-SIL WB is applied wet-on-wet from top to bottom. On small and detailed facades where spraying might be difficult, it should be applied with a brush. An additional coat may be required on highly porous surfaces. It can also be applied on slightly damp surfaces. Newly applied surfaces must be protected from rain for min. 5 hours. The full effect of the impregnant emerges completely 1–2 weeks after application. WARNINGS *Never add any foreign material to the product. *Make sure the product does not run on the surface. *Color dominance may be noticeable in some natural stone types. It is strongly recommended to perform a test on the facade surface before application. *After application, it must be protected against adverse weather conditions such as direct sunlight, strong wind, high air temperature, rain, and frost. *Tools are cleaned with water while wet. PACKAGING 10 Kg and 30 Kg plastic drum. STORAGE Must be stored in its unopened original packaging, tightly closed, in a cool environment. SHELF LIFE 12 months from the production date. For the product's technical specifications and other information, please download the TDS document.
CategoryRestoration Solutions
KG5 KG PLASTİK Drum
Technical data sheetTDS.pdf
VAT rate%20
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.

Log in, you can write a review if you have purchased this product.

There are no reviews for this product yet.

Similar Products