🌐 English ▾
📞 Customer Line 24/7539 303 00 72
🌐 English ▾
Home ›Flooring Solutions›Surface Protector and Polish ›905 ZS – Floor Hardener

905 ZS – Floor Hardener

1.164,35 ₺
Prices do not include %20 VAT; it is added at checkout.

DESCRIPTION: ZS 905 is a resin-based, solvent-free, water-based protective, surface hardener and anti-dusting coating material developed to protect concrete and screed surfaces and prevent dusting.

KG:
Option:
📞 Request a quote for bulk / pallet purchases
🚚 Fast Shipping
🛡️ Secure Payment
↩️ Easy Returns
PRODUCT INFORMATION ; DESCRIPTION: ZS 905 is a resin-based, solvent-free, water-based protective, surface hardener and anti-dusting coating material developed to protect concrete and screed surfaces and prevent dusting. AREAS OF USE Indoors and outdoors on cement-based concrete surfaces subject to all horizontal and vertical mechanical abrasion. On industrial loading and unloading floors, aircraft hangars, helicopter pads, and parking garage floors. On reinforced concrete slabs, all kinds of field concrete, and gross concrete screed surfaces. On surfaces such as natural stone, marble, pressed brick, travertine. On cement-based precast facade cladding. Used as a surface hardener, to prevent dusting, and for polishing. PRODUCT FEATURES •Provides protection by penetrating to some extent into the pores of the concrete and the aggregate structure. •Prevents dusting and crumbling in concrete and screed. •Increases the abrasion resistance of the concrete. •Imparts hardness to the surface it is applied to. •Increases chemical resistance, used indoors and outdoors. •Prevents dusting on the concrete surface by performing curing and sealing with the film layer formed inside the concrete. •Increases the water impermeability of the structure it is applied to. •Has no disturbing odor during application. •With its transparent color, a glossy and vibrant appearance is achieved in the areas where it is applied. •Preserves the naturalness of the surface on stone, brick, and concrete surfaces. TECHNICAL SPECIFICATIONS Chemical Composition: Natural resin-modified sodium silicate Color: Yellowish Transparent Liquid Density: 1.25 ± 0.02 (g/cm³) Property: Anti-dust floor hardener Consumption: 5-20 m² per 1 liter depending on absorbency Full Curing: 4-6 hours Setting Time: 7 Days Standard and Class: TS EN 1504-2 5.1 Coating application (C) Technical Data: Obtained at +20°C (±2ºC) air temperature and 50% ±5 relative humidity conditions. High temperatures shorten times, low temperatures prolong them. Actual values obtained may vary due to conditions beyond our control APPLICATION METHOD ZS 905, for troweled concrete surfaces is approximately 0.05-0.10 lt/m² per m². During application, the outdoor temperature must be greater than 2 °C. The temperature of the applied surface must be greater than 5 °C. Desired densification on absorbent surfaces is generally not achieved in a single coat, in which case a 2nd coat application is required. In such cases, waiting for drying between coats is mandatory; At +5 °C minimum 3.5-4 hours At +25 °C minimum 1.5-2 hours POINTS TO NOTE •ZS 905 application must be made on a damp floor. •When the temperature is high, the floor must be completely saturated with water before application. •There should be no standing water on the floor. •Make sure the floor is completely cleaned. Do not apply on frozen and dirty surfaces. •If the floor has uneven absorbency, a very slight color difference may occur. •It is not suitable for floors where there is advanced wear on the application surface and where aggregates are exposed. •For more information and assistance, please contact Dolphinfix Technical Service. PACKAGING: 30 Kg Plastic Jerrican SHELF LIFE: 12 months from the production date in its original, undamaged and unopened packaging. CONSUMPTION: 5-20 m² per liter depending on absorbency STORAGE CONDITIONS: Must be stored between +5 °C and 30 °C. Must be protected from frost and direct sunlight. For the product's technical specifications and other information, please download the TDS document.
CategoryFlooring Solutions › Surface Protector and Polish
KG30 KG PLASTİK Drum
OptionPiece (1 Piece), Pallet (27 Piece PLASTİK Drum)
Technical data sheetTDS.pdf
VAT rate%20
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.

Log in, you can write a review if you have purchased this product.

There are no reviews for this product yet.

Similar Products

904 YKP – Surface Protector and Polish
904 YKP – Surface Protector and Polish

DESCRIPTION: YKP 904 is a solvent-based surface protector and polishing coating that penetrates the upper layer of the surface it is applied to and forms a thin transparent layer, protecting against external factors and giving the floor gloss.

At least7.016,90 ₺
BBA 700 – Raw Concrete Primer
BBA 700 – Raw Concrete Primer

DESCRIPTION: PRIMER – BBA 700 is an acrylic-based primer material applied to raw concrete, gypsum and plaster surfaces that improves the workability of the material on the substrate.

At least984,50 ₺