DESCRIPTION: ELEVATOR-ISO – ASN 153 is a high-performance crystalline waterproofing mortar developed using cement and natural additives for sensitive negative-side waterproofing works such as elevator pits.
PRODUCT INFORMATION ; DESCRIPTION: ELEVATOR-ISO – ASN 153 is a high-performance crystalline waterproofing mortar developed using cement and natural additives for sensitive negative-side waterproofing works such as elevator pits. AREAS OF USE; • Elevator pits, • Well foundation retaining walls, •In reinforced concrete structures below sea level or exposed to water effects, • In preventing all kinds of water leaks coming from the negative direction in foundation and retaining wall waterproofing •In waterproofing of structures above and below ground, •In wastewater treatment plants, •For negative-side waterproofing in structures such as basements and tunnels, PRODUCT FEATURES ASANSÖRIZO – ASN 153 reacts with the chemicals in the applied concrete to form crystals, blocking capillary voids by following the seepage inside the concrete. On the other hand, it creates a flexible and durable layer on the surface, thus providing two-stage protection. Thanks to this superior feature, it provides excellent negative-side waterproofing. It gives excellent results in elevator pits and all negative-side applications. APPLICATION METHOD The surface must be free from all kinds of dirt, oil, and grease, weak and loose particles, and cement laitance residues. Be sure to saturate the substrate with water and dampen it 24 hours before application. It is applied in 2 coats for moisture problems, and 2 or 3 coats depending on the water seepage pressure for water leaks. The second coat should not be applied before the first coat dries. (Drying time is a minimum of 3 hours and a maximum of 24 hours.) POINTS TO NOTE ; •Weather conditions should be considered, necessary precautions should be taken against high temperatures, wind, and freezing events, and fresh applications must be protected from water and rain for at least 24 hours. •When applying on hot surfaces, cool the surface with water before starting the application. •On hot summer days, application should be done in the cool of the morning. •Do not apply on wet or frozen surfaces. •Apply negative-side applications only on concrete surfaces. •Application temperature is between +5 C and +30 C. Do not apply if there is a possibility that the temperature will drop below +5 C within 24 hours. PACKAGING: 25 Kg Kraft Bag SHELF LIFE: 12 months from the production date in its original, undamaged and unopened packaging. STORAGE CONDITIONS : Must be stored between +5 °C and 30°C. Must be protected from freezing, moisture and direct sunlight. Pallet must be stacked on top of it. A maximum of 8 bags must be placed on top of each other. For the product's technical specifications and other information, please download the TDS document.
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.
Log in, you can write a review if you have purchased this product.
DESCRIPTION: CRYSTALLIZE – C2K 152 is a two-component crystalline waterproofing mortar developed using cement and natural additives; it stops water leaks when applied from the negative side and forms an impermeable layer when applied from the positive side.
DESCRIPTION: CRYSTALLIZE – CRY 151 is a cement-based waterproofing material resistant to negative-side pressure; thanks to its active crystals it penetrates deeply into capillary cracks in concrete and blocks them.
DESCRIPTION: CRYSTALLIZE – CRA 154 is a crystalline waterproofing developed using cement and natural additives; it is sprinkled on the ground before concrete is poured, preventing water from the ground from damaging the concrete and thus protecting the concrete against corrosion.