🌐 English ▾
📞 Customer Line 24/7539 303 00 72
🌐 English ▾
Home ›Thermal Insulation›Thermal Insulation Plaster, Screed and Spray ›BORPER 1810 ISI – Thermal Insulation Plaster

BORPER 1810 ISI – Thermal Insulation Plaster

722,70 ₺
Prices do not include %20 VAT; it is added at checkout.

DESCRIPTION: HEAT-SOUND 1810 is a new-generation heat and sound insulation plaster containing cement, expanded silicates and inorganic fillers, modified with polymers and boron and reinforced with fibers.

KG:
Option:
📞 Request a quote for bulk / pallet purchases
🚚 Fast Shipping
🛡️ Secure Payment
↩️ Easy Returns
PRODUCT INFORMATION ; DESCRIPTION: HEAT-SOUND 1810 is a new-generation heat and sound insulation plaster containing cement, expanded silicates and inorganic fillers, modified with polymers and boron and reinforced with fibers. AREAS OF USE •On concrete, reinforced concrete, brick, pumice block, aerated concrete, drywall, cement-bonded particle board, OSB and mosque domes, •In horizontal, vertical and overhead plastering applications, •As a thermal and acoustic insulation plaster in interior and exterior spaces, PRODUCT FEATURES •Prevents high heat loss in buildings by providing thermal insulation. •Saves energy. •Supports sound insulation. •It has an elastic structure. •Vapor permeable. •Natural and environmentally friendly. •It is very economical compared to external thermal insulation composite systems. It provides significant savings in labor and time. •Resistant to severe weather conditions. • Provides sound insulation, ensuring high acoustic comfort in buildings. •Its breathability prevents sweating on walls and no thermal bridge forms. •Natural and environmentally friendly. •Lightweight and reduces the dead load on the building. •Very easy to prepare and apply. TECHNICAL SPECIFICATIONS TS EN 998 – 1 : 2017 21 Dry Density : 420 ±100 kg/m3 Color : Satin Gray Water mixing ratio (Bag) : 10.5 -11.5 LT Capillary water absorption : W1 , ≤0.60 kg/m2 min0•5 Compressive strength (28 Days) : CSI, ≤1.50 N/mm2 Water vapor permeability coefficient µ : ≤15 µ Thermal conductivity coefficient : T1 , <0.1 W/Mk Reaction to fire: A1 Pot life : 3-4 hours Application Temperature : 5-35˚C Bond strength (28 Days) : > 0.23 N/mm2 (0.35) Plaster thickness : 1-3mm Consumption : (1 cm thickness):4.0-5.0 kg/m2 Shelf life : 12 Months (Under suitable conditions) Application method : With a steel trowel Obtained at +20°C (±2°C) air temperature and 50% ±5 relative humidity. High temperatures shorten the times, low temperatures extend them. APPLICATION INFORMATION Surface Preparation: The application surface must be solid, anti-adhesive, dry, dust-free, and clean. The surface must be thoroughly cleaned of all kinds of oil, grease, rust, and paraffin residues that would reduce adhesion, and there must be no loose particles on the surface. If the surface temperature to be applied is above +35 °C, the surface must be dampened. Defective areas on the surface should be repaired with the appropriate D-TH repair mortar. Mixing We recommend using a piston plaster pump for mortar mixing and plaster application. For traditional mixing, into a clean bucket 11 lt. pour a portion of the clean water. Slowly pour 15 Kg of ISI – SES 1810 into it while starting to mix with a mixer at low speed. Add the remaining water and mix for at least 5 minutes until the mortar becomes lump-free and homogeneous. Allow to rest for 3-4 minutes. Then mix for at least 3 more minutes before use. Application You can apply the prepared mortar up to a thickness of 3 cm in a single coat. For the second coat application, wait at least 48 hours depending on weather conditions. The full curing time is a minimum of 7 days depending on weather conditions. Painting must not be proceeded with before full curing is achieved. WARNINGS It must be protected in environments below (+) 5°C and above (+) 35°C. Its surroundings must be covered with nylon. Precautions against frost and sudden water loss must be taken. PACKAGING 15 KG Kraft Bag SHELF LIFE 12 months from the production date in its original, undamaged and unopened packaging, provided storage conditions are observed. CONSUMPTION AND WATER AMOUNT m² Powder Consumption for 1 cm thickness is 6 kg MIXING WATER AMOUNT 11 Lt. / 15 Kg
CategoryThermal Insulation › Thermal Insulation Plaster, Screed and Spray
KG15 KG Kraft Bag
OptionPiece (1 Piece), Pallet (72 Piece Kraft Bag)
Technical data sheetTDS.pdf
VAT rate%20
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.

Log in, you can write a review if you have purchased this product.

There are no reviews for this product yet.

Similar Products