🌐 English ▾
📞 Customer Line 24/7539 303 00 72
🌐 English ▾
Home ›Construction Chemicals›Ceramic Tile Adhesive ›D FIX 1200 – C1T Tile and Ceramic Adhesive

D FIX 1200 – C1T Tile and Ceramic Adhesive

288,20 ₺
Prices do not include %20 VAT; it is added at checkout.

DESCRIPTION: FIX 1200 is a C1T cement-based, hydraulic-binder tile and ceramic adhesive.

Color:
KG:
Option:
📞 Request a quote for bulk / pallet purchases
🚚 Fast Shipping
🛡️ Secure Payment
↩️ Easy Returns
PRODUCT INFORMATION ; DESCRIPTION: FIX 1200 is a C1T cement-based, hydraulic-binder tile and ceramic adhesive. AREAS OF USE •In Wall and Floor Coverings •Indoors and Outdoors. •In wet areas, PRODUCT FEATURES AND ADVANTAGES •High adhesion. •Easy and smooth to use, •Does Not Slip in Vertical Applications, TECHNICAL SPECIFICATIONS Appearance / Color: Powder / Gray and White Application temperature: (+5 °C) – (+35 °C) Pot life: 5 hours Slip: ≤0.5 mm Open time: At least 30 min, then ≥0.5 N/mm² Initial pull-off adhesion strength: ≥0.5 N/mm² After water immersion: ≥0.5 N/mm² After heat aging: ≥0.5 N/mm² After freeze-thaw cycles: ≥ 0.5 N/mm² Temperature resistance: (-40 °C) – (+80 °C) Reaction to fire: A1 Typical values: obtained as a result of experiments conducted on 4x4x16 cm mortar prisms at +23°C and 50% relative humidity conditions. High temperatures shorten the durations, low temperatures prolong them. APPLICATION METHOD Surface Preparation: The application surface must be sound, dry, dust-free, clean, and free from anti-adherent agents. The surface must be thoroughly cleaned from all kinds of oil, grease, rust, and paraffin residues that would reduce adhesion, and there should be no loose particles on the surface. The substrate to be applied must be damp, with no standing water. The use of a primer is recommended on water-absorbent surfaces and exposed concrete. If the application surface temperature is above +30 °C, the surface must definitely be dampened. Pour the specified amount of clean water into a clean bucket. Empty half of the 25 Kg. FIX 1200 into it and start mixing at low speed with a mixer. Add the entire remainder and mix until the mortar becomes lump-free and homogeneous, then let it rest for 5-6 min. for maturation. Then, mix for another 1-2 min. before use. Spread the adhesive over the entire surface and apply it at an uniform thickness by combing with a notched trowel. Covering materials (tiles, ceramics) are bonded onto the combed mortar within 25 min. Checking the surface flatness, ensure proper embedding and adhesion of the covering materials by tamping with a rubber mallet. Joint grouting application should be carried out at least 24 hours later. WARNINGS: Do not use material remaining in the container that has exceeded its shelf life or has formed a crust. This material must be discarded. Prepare only as much material as you can use. The material combed onto the blocks must be used within 10 min, otherwise it must be scraped off and discarded. Tools should be cleaned while the mortar is wet. It must be strictly protected in environments below (+) 5°C and above (+) 35°C. Its perimeter should be covered with polyethylene. Precautions must be taken against frost and rapid water loss. PACKAGING: 25 Kg Kraft Bag SHELF LIFE: 12 months from the production date in its original, undamaged and unopened packaging, provided storage conditions are observed. STORAGE: Must be stored between +5 °C and 30 °C. Must be protected from frost, moisture, and direct sunlight.
CategoryConstruction Chemicals › Ceramic Tile Adhesive
ColorWhite, Gray
KG25 KG Kraft Bag
OptionPallet (64 Piece Kraft Bag), Piece (1 Piece)
Technical data sheetTDS.pdf
VAT rate%20
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.

Log in, you can write a review if you have purchased this product.

There are no reviews for this product yet.

Similar Products