Home
›Construction Chemicals›Aerated Concrete Adhesive ›D FIX GB 1260 DGB – High-performance Aerated Concr...
D FIX GB 1260 DGB – High-performance Aerated Concrete Adhesive [M5]
297,00 ₺
%0 off
Prices do not include %20 VAT; it is added at checkout.
DESCRIPTION: DGB 1260 is a cement-based, high-performance autoclaved aerated concrete adhesive that provides long and easy workability by retaining water within its structure.
📞 Request a quote for bulk / pallet purchases🚚 Fast Shipping
🛡️ Secure Payment
↩️ Easy Returns
PRODUCT INFORMATION ; DESCRIPTION: DGB 1260 is a cement-based, high-performance autoclaved aerated concrete adhesive that provides long and easy workability by retaining water within its structure. AREAS OF USE •Used for laying construction materials such as autoclaved aerated concrete, pumice blocks, and bricks. PRODUCT FEATURES AND ADVANTAGES •Very easy to apply. •Bond strength is very high, •Retains water within its structure. •Provides long workability. •Adhesion is high. •Allows adjustment during application. • Provides ease of application. TECHNICAL SPECIFICATIONS Bond Strength (TS EN 998-2): -0.3 N/mm² Capillary Water Absorption (TS EN 1015-18): ≤0.40 kg/m²·min^0.5 Air Content (TS EN 1015-7): < % 20 Compressive Strength (TS EN 1015-11): ≥ 5 N/mm² M5 Water Vapour Permeability (TS EN 1745): 5/20 µ Reaction to Fire (TS EN 13501-1): A1 Hazardous substances: See the safety data sheet. Obtained at an air temperature of +20°C (±2ºC) and 50% ±5 relative humidity conditions. High temperatures shorten the durations, low temperatures extend them. The actually obtained values may vary due to conditions beyond our control. APPLICATION METHOD Surface Preparation: The application surface must be sound, dry, dust-free, clean, and free from anti-adhesive agents. The surface must be thoroughly cleaned from all kinds of oil, grease, rust, and paraffin residues that would reduce adhesion, and there must be no loose particles on the surface. If the surface temperature to be applied is above +30 °C, the surface must definitely be dampened. Mixing: Pour the specified amount of clean water into a clean bucket. Pour half of 25 Kg. DGB 1260 into it and start mixing at low speed with a mixer. Leave the mortar to mature for 5-6 min. until it becomes lump-free and homogeneous. Then mix for another 1-2 min. before use. Application: Spread the adhesive over the entire surface and apply it at the same thickness by combing with a 10X10X10 mm notched trowel. While laying, make sure to leave a joint width of maximum 3 mm horizontally and vertically. Completely fill the joint gaps with adhesive. The absorbency of the combed surface must be taken into account, and the bonding process must be carried out without waiting for more than 10 minutes. WARNINGS: Do not use material remaining in the container, expired, or crusted. This material must be discarded. The combed material on the blocks must be used within 10 min, otherwise it must be scraped off and discarded. It must definitely be protected in environments below (+) 5 °C and above (+) 35 °C. The surroundings must be covered with nylon. Precautions must be taken against frost and sudden water loss. PACKAGING: 25 Kg Kraft Bag SHELF LIFE: 12 months from the production date in its original, undamaged and unopened packaging, provided storage conditions are observed. STORAGE: Must be stored between +5 °C and 30 °C. Must be protected from frost, moisture, and direct sunlight.
| Category | Construction Chemicals › Aerated Concrete Adhesive |
| KG | 25 KG Kraft Bag |
| Option | Piece (1 Piece), Pallet (64 Piece Kraft Bag) |
| Technical data sheet | TDS.pdf |
| VAT rate | %20 |
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.
Log in, you can write a review if you have purchased this product.
There are no reviews for this product yet.