🌐 English ▾
📞 Customer Line 24/7539 303 00 72
🌐 English ▾
Home ›Construction Chemicals›Grout ›D GROUT GRT 1108 – Non-shrink Grout Mortar [ÇEKME...

D GROUT GRT 1108 – Non-shrink Grout Mortar [ÇEKME YAPMAYAN]

Category: Grout
354,20 ₺
Prices do not include %20 VAT; it is added at checkout.

DESCRIPTION: GRT 1108 is a high-strength, flowable, non-shrinking, ready-to-use special grout mortar.

KG:
Option:
📞 Request a quote for bulk / pallet purchases
🚚 Fast Shipping
🛡️ Secure Payment
↩️ Easy Returns
PRODUCT INFORMATION ; DESCRIPTION: GRT 1108 is a high-strength, flowable, non-shrinking, ready-to-use special grout mortar. AREAS OF USE •Used for the fixing and grouting of iron components, bolts, anchors, rails, and similar elements of machinery, trains, and all kinds of steel structures, •Used as a mortar for filling the joints of prefabricated elements and precast panels. PRODUCT FEATURES •Good flowability. High strength, •Provides rapid strength development •Does not undergo shrinkage and contraction. (Shrinkage-free) •Sets early and provides excellent adhesion. •Resistant to corrosion. •Can be applied indoors and outdoors. •It is waterproof and resistant to frost. TECHNICAL SPECIFICATIONS Material composition: Contains mineral fillers, synthetic additives and cement. Color: Gray Compressive strength (TS EN 12190): Day 1 ≥24 N/mm² 7.Days ≥45 N/Mm² Day 28 ≥60 N/mm² Flexural Strength (28 days) (TS EN 196): ≥7 N/mm² Adhesion (pull-off) strength (TS EN 1542) (to concrete, 28 days): ≥2.0 N/mm² *Modulus of elasticity (28 days): >20,000 N/mm² Capillary water absorption (TS EN 13057): <0.5 kg.m⁻².h⁻⁰·⁵ Application Thickness: 10 mm to 70 mm Temperature of the substrate to be applied: +5°C to +30°C Service temperature: -20°C to +40°C Pot life (+20°C): 30 min. Walkable after (+20°C): 24 hours Full curing time (+20°C): 28 days Typical values: Obtained as a result of tests performed on 4x4x16 cm mortar prisms at +23°C and 50% relative humidity conditions. High temperatures shorten durations, low temperatures prolong them. APPLICATION METHOD Surface Preparation: Care must be taken to ensure that the surfaces to be applied are sound, load-bearing, dust-free and clean. They must be thoroughly cleaned of residues that would weaken adhesion, such as accumulated water, rust, metal shavings, grease and ice. In formwork applications, all formworks must have sufficient strength, formwork oil must definitely be applied and leakages must be prevented. The application surface must be saturated with water, but no free water should remain on the surface. Mixing The appropriate amount of water is poured into a clean mixing bucket using a measuring scale. Half of the 25 Kg GRT 1108 is added to the water in the bucket and mixed with a low-speed mixer for 4 minutes until a homogeneous and lump-free mixture is obtained. MIXING RATIOS GRT 1108 FOR 1 KG POWDER FOR 25 KG BAG MIXING WATER AMOUNT 0.12 l – 0.14 l / 3.0 l – 3.5 l MIX DENSITY 2.30 kg/l Application Pour the prepared mortar into the application spot. It must be ensured that the air bubbles inside the mortar have escaped. To prevent premature drying, a curing agent may be used or prevented by appropriate methods (such as keeping wet, covering with a wet cloth). In cold weather, use protective covers or take other necessary precautions. PACKAGING 25 kg kraft bag. CONSUMPTION 2 kg of powder product per 1 liter of mortar SHELF LIFE 12 months from the production date under suitable storage conditions. Opened packages must be stored under suitable conditions and used within one week.
CategoryConstruction Chemicals › Grout
KG25 KG Kraft Bag
OptionPiece (1 Piece), Pallet (64 Piece Kraft Bag)
Technical data sheetTDS.pdf
VAT rate%20
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.

Log in, you can write a review if you have purchased this product.

There are no reviews for this product yet.

Similar Products