🌐 English ▾
📞 Customer Line 24/7539 303 00 72
🌐 English ▾
Home ›Construction Chemicals›Grout ›D GROUT S DGS 1110 – Rapid-setting Grout and Ancho...

D GROUT S DGS 1110 – Rapid-setting Grout and Anchoring Mortar

Category: Grout
411,95 ₺
Prices do not include %20 VAT; it is added at checkout.

DESCRIPTION: DGS 1110 is a cement-based, high-strength, fast-setting, flowable special casting mortar.

KG:
Option:
📞 Request a quote for bulk / pallet purchases
🚚 Fast Shipping
🛡️ Secure Payment
↩️ Easy Returns
PRODUCT INFORMATION ; DESCRIPTION: DGS 1110 is a cement-based, high-strength, fast-setting, flowable special casting mortar. AREAS OF USE •In the repair and raising of special concrete ramps, runways, and manhole covers requiring high early strength, •In post fixing, •In fixing street furniture and traffic signs, •In curbstone application, PRODUCT FEATURES •With its high fluidity property, it can flow into any mold •Provides very rapid strength development, the application area can be opened to traffic after 1 hour, •Non-shrink •Contains high-quality chemical additives, •High abrasion resistance, •Free of solvent and asbestos. •Does not segregate or bleed •Provides early high strength, •Waterproof. Resistant to severe weather conditions and frost. TECHNICAL SPECIFICATIONS Material composition: Contains mineral fillers, synthetic additives and cement. Color Gray Compressive strength (TS EN 12190): 1 Hours After ≥12 N/Mm² Day 1 ≥24 N/mm² 7. Days ≥40 N/Mm² Day 28 ≥60 N/mm² Flexural Strength (28 days)(TS EN 196): ≥7 N/mm² Adhesion (pull-off) strength (TS EN 1542) (to concrete, 28 days): ≥2.0 N/mm² Capillary water absorption (TS EN 13057): <0.5 kg.m⁻².h⁻⁰·⁵ Application thickness: 10 mm to 150 mm Temperature of the substrate to be applied: +5°C to +30°C Service temperature: -20°C to +40°C Initial setting time: 7 min Walkability Time (+20°C): 1 hour Typical values: Obtained as a result of tests performed on 4x4x16 cm mortar prisms at +23°C and 50% relative humidity conditions. High temperatures shorten durations, low temperatures prolong them. APPLICATION METHOD Surface Preparation: Care must be taken to ensure that the surfaces to be applied are sound, load-bearing, dust-free and clean. They must be thoroughly cleaned of residues that would weaken adhesion, such as accumulated water, rust, metal shavings, grease and ice. In formwork applications, all formworks must have sufficient strength, formwork oil must definitely be applied and leakages must be prevented. The application surface must be saturated with water, but no free water should remain on the surface. Mixing The appropriate amount of water is poured into a clean mixing bucket using a measuring cup. Half of the 25 Kg DGS 1110 is added onto the water in the bucket and mixed with a low-speed mixer for 4 minutes until a homogeneous and lump-free mixture is obtained. MIXING RATIOS DGS 1110 FOR 1 KG POWDER FOR 25 KG BAG MIXING WATER AMOUNT 0.12 l – 0.14 l / 3.0 l – 3.5 l MIX DENSITY 2.30 kg/l Application Pour the prepared mortar onto the application site. It must be ensured that the air bubbles inside the mortar have been released. To prevent premature drying, curing compounds can be used or prevented by appropriate methods (such as keeping wet, covering with a wet cloth). Use protective covers in cold weather or take other necessary precautions. PACKAGING 25 kg kraft bag. CONSUMPTION 2 kg of powder product per 1 liter of mortar SHELF LIFE 12 months from the production date under suitable storage conditions. Opened packages must be stored under suitable conditions and used within one week.
CategoryConstruction Chemicals › Grout
KG25 KG Kraft Bag
OptionPiece (1 Piece), Pallet (64 Piece Kraft Bag)
Technical data sheetTDS.pdf
VAT rate%20
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.

Log in, you can write a review if you have purchased this product.

There are no reviews for this product yet.

Similar Products