🌐 English ▾
📞 Customer Line 24/7539 303 00 72
🌐 English ▾
Home ›Thermal Insulation›External Thermal Insulation (ETICS) ›D THERM 1702 DYS – ISI YALITIM,MANTOLAMA LEVHA YAP...

D THERM 1702 DYS – ISI YALITIM,MANTOLAMA LEVHA YAPIŞTIRICISI and SIVASI

336,60 ₺
Prices do not include %20 VAT; it is added at checkout.

DESCRIPTION: DTY 1702 is a cement-based, polymer-modified, fiber-reinforced adhesive and plaster mortar developed for bonding thermal insulation boards (EPS, XPS, rock wool, heat and sound insulation felt, etc.) to the substrate and plastering over them.

KG:
Option:
📞 Request a quote for bulk / pallet purchases
🚚 Fast Shipping
🛡️ Secure Payment
↩️ Easy Returns
PRODUCT INFORMATION ; DESCRIPTION: DTY 1702 is a cement-based, polymer-modified, fiber-reinforced adhesive and plaster mortar developed for bonding thermal insulation boards (EPS, XPS, rock wool, heat and sound insulation felt, etc.) to the substrate and plastering over them. AREAS OF USE • Used in the bonding and rendering of all thermal insulation boards (EPS, XPS, rock wool, thermal and acoustic insulation felt, etc.). •In horizontal, vertical and overhead plastering applications, •In architectural structures where thermal insulation is applied, •Indoors and outdoors, • Used in rendering on concrete, aerated concrete, gross concrete, and hollow-core polystyrene floor blocks, • Used as general plaster outside of exterior insulation systems. PRODUCT FEATURES • High bond strength. • Resistant to temperature and frost (after hardening). •Comfort of professional application. •Long-lasting. •Vapor permeable. TECHNICAL SPECIFICATIONS Adhesion Strength to Substrate :≥ 0,5 N/mm² (EN 1015-12) Polystyrene Adhesion Strength :≥ 0,08 N/mm² (EN 13494) Flexural Strength :≥ 2 N/mm² (EN 1015 – 11 ) Compressive Strength :≥ 6 N/mm² (EN 1015 – 11 ) Water Absorption :≤0,5 (kg/m².min°·⁵) (TS EN 1015-18) Water Vapour Permeability :≤ 15 µ ( TS EN 1015 – 19) Reaction to fire: A1 Conforming Standard :TS 13687 – TS 13566 Hazardous substances: See the safety data sheet. APPLICATION INFORMATION Surface Preparation: The application surface must be sound, dry, dust-free, clean, and free from agents preventing adhesion. The surface must be thoroughly cleaned of all kinds of oil, grease, rust, and paraffin residues that would reduce adhesion, and there should be no loose particles on the surface. If the surface temperature to be applied is above +30 °C, the surface must definitely be dampened. Defective areas on the surface should be repaired with the appropriate D-TH repair mortar. Pre-Application: After the thermal insulation boards are bonded and the drying time has elapsed, the gaps that may form between the boards are filled with board pieces cut to an appropriate size, and the doweling process is carried out. The doweling process is performed at a rate of 6 dowels per 1 m². The number of dowels should be increased as the floors get higher. Make sure that the head of the dowels is neither protruding too much nor recessed too much. Mixing: Put a portion of 6 – 7 lt. of clean water into a clean bucket. While slowly pouring 25 Kg. DTS 1702 into it, start mixing with a mixer at low speed. Add the remaining water and leave the mortar to rest for 3-4 min. until it becomes lump-free and homogeneous. Then mix for at least 2 more min. before use CONSUMPTION AND WATER AMOUNT TABLE DTS 1701 POLYSTYRENE BOARD ROCK WOOL 1 m² Powder Consumption 4,5 – 5,5 Kg 5,5 – 6,5 Kg MIXING WATER AMOUNT 6 – 7 Lt./25 Kg WARNINGS: Must be strictly protected in environments below (+) 5°C and above (+) 35°C. It must be covered with nylon. Precautions must be taken against frost and sudden water loss. PACKAGING: 25 Kg Kraft Bag SHELF LIFE: 12 months from the production date in its original, undamaged and unopened packaging, provided storage conditions are observed.
CategoryThermal Insulation › External Thermal Insulation (ETICS)
KG25 KG Kraft Bag
OptionPiece (1 Piece), Pallet (64 Piece Kraft Bag)
Technical data sheetTDS.pdf
VAT rate%20
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.

Log in, you can write a review if you have purchased this product.

There are no reviews for this product yet.

Similar Products