🌐 English ▾
📞 Customer Line 24/7539 303 00 72
🌐 English ▾
Home ›Thermal Insulation›External Thermal Insulation (ETICS) ›D THERM 1704 DTDS – Decorative Textured Plaster 2...

D THERM 1704 DTDS – Decorative Textured Plaster 2 Micron

385,55 ₺
Prices do not include %20 VAT; it is added at checkout.

DESCRIPTION: DTDS 1704 is a cement-based, polymer-modified, fiber-reinforced, water-repellent coating material used as an exterior facade top-coat plaster.

KG:
Option:
📞 Request a quote for bulk / pallet purchases
🚚 Fast Shipping
🛡️ Secure Payment
↩️ Easy Returns
PRODUCT INFORMATION ; DESCRIPTION: DTDS 1704 is a cement-based, polymer-modified, fiber-reinforced, water-repellent coating material used as an exterior facade top-coat plaster. AREAS OF USE •As a top coat on interior and exterior surfaces of architectural structures such as residences, shopping malls and hospitals, •In horizontal, vertical and overhead plastering applications, •On all mineral surfaces, •As a top coat on exterior facade coatings, •As a decorative coating on raw concrete and rough plaster, PRODUCT FEATURES •Gives the applied surface a beautiful appearance. •Resistant to outdoor conditions and temperature differences. •Comfort of professional application. •Long-lasting. •Vapor permeable. TECHNICAL SPECIFICATIONS Grain size: Class S4 (TS EN ISO 1524, TS EN ISO 787-7 ) Water vapor transmission rate: Class V1 (TS EN ISO 7783) Water transmission rate: Class W1 (TS EN 1062 – 3) Impact strength: >joule (EN 13497) Dry film thickness: Class E5 (TS EN 1062 – 1) Crack bridging: Class A0 (TS EN 1062 – 7) Carbon dioxide permeability: Class CO ( TS EN 1062-6 ) Reaction to fire: A1 (TS EN 13501 – 1) Standard met: TS 7847 Typical values: Obtained as a result of tests performed on 4x4x16 cm mortar prisms at +23°C and 50% relative humidity conditions. High temperatures shorten durations, low temperatures prolong them. APPLICATION METHOD Surface Preparation: The application surface must be sound, dry, dust-free, clean, and free of substances that prevent adhesion. The surface must be thoroughly cleaned of all kinds of oil, grease, rust, and paraffin residues that would reduce adhesion, and there must be no loose particles on the surface. If the surface temperature to be applied is above +30 °C, the surface must definitely be dampened. Surface defects must be repaired with the appropriate D-TH repair mortar. Before Application: We recommend using DEK 710 primer as a decorative primer before application in hot weather. Mixing: Pour a portion of 5.5 – 6.5 lt. of clean water into a clean bucket. Slowly pour 25 Kg. of DTDS 1704 into it while starting to mix with a mixer at low speed. Add the remaining water and let the mortar rest for 3-4 minutes until it becomes lump-free and homogeneous. Then mix for at least 3 more minutes before use. CONSUMPTION AND WATER AMOUNT TABLE DTDS 1704 1 m² Powder Consumption 3 – 4 Kg MIXING WATER AMOUNT 5.5 – 6 l / 25 kg Application: Pay attention to using equal amounts of water. Using different amounts of water will cause different tone and pattern appearances. Depending on air temperatures, the prepared mixture must be used within 60 minutes. The prepared mixture is applied to the surface with a steel trowel and a layer of grain size is obtained. To give a pattern, depending on weather conditions, the pattern must be given with a plastic trowel within a maximum of 8-10 minutes. Circular movements should be made to give a pattern. PACKAGING: 25 Kg Kraft Bag SHELF LIFE: 12 months from the production date in its original, undamaged and unopened packaging, provided storage conditions are observed.
CategoryThermal Insulation › External Thermal Insulation (ETICS)
KG25 KG Kraft Bag
OptionPiece (1 Piece), Pallet (64 Piece Kraft Bag)
Technical data sheetTDS.pdf
VAT rate%20
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.

Log in, you can write a review if you have purchased this product.

There are no reviews for this product yet.

Similar Products

THERM 004 Primer – THERM Thermal Insulation Primer
THERM 004 Primer – THERM Thermal Insulation Primer

DESCRIPTION: Therm 004 primer is based on styrene-acrylic emulsion resin. With its transparent structure it is a surface primer used for interior and exterior purposes. This product offers an effective solution for priming surfaces and prepares them for subsequent coating operations.

At least3.033,80 ₺