DESCRIPTION: FLEX WHITE – FBY 170 is a single-component, water-based waterproofing material based on elastomeric resin that forms a waterproof elastic layer on the surface it is applied to.
PRODUCT INFORMATION ; DESCRIPTION: FLEX WHITE – FBY 170 is a single-component, water-based waterproofing material based on elastomeric resin that forms a waterproof elastic layer on the surface it is applied to. AREAS OF USE; •In swimming and ornamental pools, •Bathrooms and WCs, •On balconies and sloped terraces, •In areas where buildings meet the ground, •In water tanks, •Used in insulating chimney edges, eaves and concealed gutters. PRODUCT FEATURES; •Ready to use •Provides very good adhesion on difficult substrates. •Highly flexible even at low temperatures. •High resistance to heavy water penetration, •Excellently protects the applied surface against carbonation. •Can be applied directly with brush, roller or spray equipment. •Can be painted or tiled over. APPLICATION METHOD : The surface must be cleaned of all kinds of dirt, oil, and grease, weak and loose particles, and cement laitance residues. If there are cracks and cavities on the surface to be applied, they should be repaired with one of the appropriate DOLPHINFIX TH repair mortars, and application of FLEX BEYAZ – FBY 170 should be proceeded 3 days later. The surface to be waterproofed must be dry. It can be slightly dampened in summer. If there is standing water or pooling, joint sealing tape must be applied to all corners in advance. POINTS TO NOTE; •Do not apply while it is raining, •Do not apply under direct sunlight, •Do not add foreign materials. •To obtain long-term performance from the product, it must be covered with tiles, screed, plaster, etc.. •Do not apply in very hot and humid weather. •Do not apply in weather with a risk of frost. •Do not apply on frozen or thawing surfaces. •Priming must be carried out on absorbent surfaces. (For primer application, a quantity of FLEX BEYAZ – FBY 170 is put into a clean container, 50% water is added, mixed, and applied to the surface.) •Glass fiber can be used as a carrier between coats. After the 1st coat, check by hand; if no marks remain, proceed to the other coats. •Applications must be made perpendicular to each other. STORAGE CONDITIONS ; •Store between +5°C and 35°C. •Protect from frost, moisture and direct sunlight. PACKAGING: 20 Kg bucket CONSUMPTION: 1.50 kg/m² (for 1 mm dry film thickness) SHELF LIFE: 12 months from the production date in its original, undamaged and unopened packaging. For the product's technical specifications and other information, please download the TDS document.
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.
Log in, you can write a review if you have purchased this product.
DESCRIPTION: FLEX GRAY – FGR 171 is a single-component, water-based waterproofing material based on elastomeric resin that forms a waterproof elastic layer on the surface it is applied to.