DESCRIPTION: TUĞ 1660 is a cement-based, high-performance, hydraulically hardening wide-joint grout developed specifically for decorative stone joints.
PRODUCT INFORMATION; DESCRIPTION: TUG 1660 is a cement-based, high-performance, hydraulically setting wide joint grout mortar specially developed especially for decorative stone joints. FIELDS OF APPLICATION •In filling joints of wall and floor coverings, •In natural and artificial stone coverings, •In handmade coverings, •In decorative brick coverings, •In cement-based coverings, • In lime-based coverings, PRODUCT FEATURES AND ADVANTAGES •For joints between 6 – 40 mm, •Crack-free setting, •Excellent adhesion, •Resistant to water and frost, •Has an easy and slippery usage, •Provides a smooth surface. TECHNICAL SPECIFICATIONS Complied Standard: TS EN 13888 – CG1 Material Structure: Contains special cements, polymer and mineral fillers. Color: White and special colors Compressive strength (EN 12808-3): ≥15 N/mm² Compressive strength after freeze-thaw cycle (EN 12808-3) : ≥15 N/mm² Flexural strength (EN 12808-3): ≥3,5 N/mm² Flexural strength after freeze-thaw cycle (EN 12808-3): ≥3,5 N/mm² Shrinkage (EN 12808-4): ≤2 mm/m Abrasion Resistance (EN 12808-2): ≤2000 mm³ Water Absorption 30 min ≤5 g Water Absorption 4 hours (EN 12808): ≤ 10 g Temperature Resistance: (-20°C) – (+70°C) Obtained as a result of experiments performed on 4x4x16 cm mortar prisms at +23°C and 50% relative humidity conditions. High temperatures shorten the periods, low temperatures lengthen them. APPLICATION METHOD Surface Preparation: Make sure that the surfaces to be applied are well adhered to the ground and the adhesive mortar has dried. Remove dry mortars remaining in the joint gaps. Do not start application without thoroughly cleaning all kinds of dust, cement residue, dirt, oil, etc. Make sure that the joint gaps are 2/3 of the ceramic thickness. Moisten the cleaned joint gaps before application. Fill a part of the specified amount of water into a clean container. TUG 1660 is added slowly and mixed for 4 minutes with a 400-600 rev mixer until a homogeneous and lump-free mixture is obtained. After letting it rest for about 4 minutes and mixing for another 2 minutes, the material is ready for use. The mortar in the container should be consumed in about 1 hour depending on the ambient temperature. Application The prepared mortar should be filled into the joint gaps with a hard rubber-based joint spreading trowel or a suitable steel trowel. Excess mortar remaining on the surface should be scraped off with a soft tipped spatula. After 15-30 min. depending on the ambient temperature, the thin joint layer remaining on the application surface should be wiped with a damp sponge. The cleaning sponge should be cleaned frequently. Do not start the wiping process prematurely. PACKAGING 20 kg kraft bag. In 5 kg packages CONSUMPTION See joint grout consumption table for consumption. SHELF LIFE 12 months from the production date under appropriate storage conditions. Opened packages should be stored under appropriate storage conditions and used within one week. STORAGE It should be stored in its unopened original packaging, in a cool and dry environment, protected from frost. In short-term storage, a maximum of 2 pallets should be placed on top of each other and shipment should be made with the first-in, first-out system. In long-term storage, pallets should not be placed on top of each other.
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.
Log in, you can write a review if you have purchased this product.