🌐 English ▾
📞 Customer Line 24/7539 303 00 72
🌐 English ▾
Home ›Restoration Solutions›Historic Building Injection Mortar ›Horasan 1101 INJ – Natural Hydraulic Lime-based In...

Horasan 1101 INJ – Natural Hydraulic Lime-based Injection Grout

30.360,00 ₺
Prices do not include %20 VAT; it is added at checkout.

DESCRIPTION: HORASAN INJ 1101 is an injection mortar developed for historic masonry structures, containing natural hydraulic lime, pozzolanic lime, micronized carbonates and various micronized aggregates.

KG:
Option:
📞 Request a quote for bulk / pallet purchases
🚚 Fast Shipping
🛡️ Secure Payment
↩️ Easy Returns
PRODUCT INFORMATION ; DESCRIPTION: HORASAN INJ 1101 is an injection mortar containing natural hydraulic lime, pozzolanic lime, micronized carbonates and various micronized aggregates, developed for historical masonry structures. AREAS OF USE •In historical artifact restorations, •In sulfate environments, •On brick and natural stone walls, •Used for filling cracks formed in domes, vaults and foundations by injection method. PRODUCT FEATURES AND ADVANTAGES •Eco-friendly, •Contains no cement, •High adhesion strength, •High water vapor permeability, •Resistant to chlorine, sulfate and oils. •Very easy to prepare and apply, •Does not require an additional product, •Compatible with historical texture, •Balances moisture, does not cause mold. TECHNICAL SPECIFICATIONS Structure of the Material: Natural hydraulic lime, Micronized carbonate and aggregates. Color: Off-White, Beige Compressive Strength: M5 (28 days) Fluidity (DIN CUP No. 6) Initially <35 sec After 20 min <45 sec Application Substrate Temperature: +5°C +35°C Service Temperature: -20°C +40°C Pot Life (+20°C): 60 min. Typical values: Obtained as a result of tests performed on 4x4x16 cm mortar prisms at +23°C under 50% relative humidity conditions. High temperatures shorten times, low temperatures prolong them. APPLICATION METHOD Surface Preparation The plaster on the surface must be completely removed in order to see all dimensions of the cracks. Care must be taken to ensure that the surfaces to be applied are sound, dust-free and clean. The surface must be thoroughly cleaned of all kinds of oil, rust, grease and paraffin residues that would weaken adhesion. If there is water flow in the area to be applied, it must be drained or plugged with a suitable plug. CRACK APPLICATIONS First of all, the width, depth and ambient conditions of the cracks must be determined. If the crack width is less than 5 mm, holes should be drilled alternately on both sides of the crack at appropriate intervals (30-50 cm) and these holes must drill through the substrate where the crack is located and pass to the other side. Care should be taken to drill the opened holes at a 45°C angle to each other. Remove dust and broken particles by blowing air into the drilled holes. Drive plastic packers into the holes and tighten them well to fix them. The packer surroundings and the crack surface must be plastered with HORASAN INCE 1120 and sealing must be ensured. Depending on weather conditions, the injection process should be started at the earliest 24 hours later. If the cracks are wider than 5 mm, appropriate intervals (75 – 100) are determined by taking into account the depth and width of the crack and ambient conditions. After cleaning the holes from dust and free particles with compressed air, pneumatic hoses are placed. Hose surroundings and crack surfaces must be plastered with HORASAN INCE 1120 and sealing must be ensured. Injection application should be started at the earliest 24 hours later depending on weather conditions. MIXING The appropriate amount of water is poured into a clean mixing bucket with the help of a measure. HORASAN INJ 1101 is added slowly and mixed for 4 minutes with a 400-600 rpm mixer until a homogeneous and lump-free mixture is obtained. After letting it rest for about 5 minutes and mixing again for 1 minute, the material is ready for use. MIXING RATIOS FOR 1 KG POWDER OF HORASAN INJ 1101 FOR 25 KG BAG MIXING WATER AMOUNT 0.30 lt – 0.38 lt 7.5 lt – 9.5 lt MIXING DENSITY 1500 ±150 kg/m3
CategoryRestoration Solutions › Historic Building Injection Mortar
KG25 KG Kraft Bag
OptionPallet (60 Piece Kraft Bag)
Technical data sheetTDS.pdf
VAT rate%20
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.

Log in, you can write a review if you have purchased this product.

There are no reviews for this product yet.