PRODUCT INFORMATION ; DESCRIPTION: HORASAN INCE 1120 is a natural hydraulic lime-based fine horasan plaster developed to obtain a smooth surface before painting. AREAS OF USE •To smooth the surface of coarse horasan plaster (KALIN 1121) developed for historical masonry structures, •To obtain a smooth surface before painting, •In fine surface repairs, PRODUCT FEATURES AND ADVANTAGES •Contains no cement, •High adhesion strength, •Low capillary water absorption rate, •Resistant to chlorine, sulfate and oils. •Very easy to prepare and apply, •Does not require an additional product, •Asbestos-free, eco-friendly, APPLICATION METHOD Surface Preparation: Care must be taken to ensure that the surfaces of the structures to be plastered are sound, dust-free and clean. The surface must be thoroughly cleaned of all kinds of oil, rust, grease and paraffin residues that would weaken adhesion. To increase the adhesion of the area to be applied and to improve the bonding and strength of the mortar to the surface, the surface must be pre-moistened. MIXING The appropriate amount of water is poured into a clean mixing bucket with the help of a measure. HORASAN INCE 1120 is added slowly and mixed for 10 minutes with a 400-600 rpm mixer until a homogeneous and lump-free mixture is obtained. After letting it rest for about 5 minutes and mixing again for 5 minutes, the material is ready for use. MIXING RATIOS FOR 1 KG POWDER OF HORASAN INCE 1120 FOR 20 KG BAG MIXING WATER AMOUNT 0.25 lt – 0.30 lt 5.0 lt – 6.0 lt MIXING DENSITY 1.20 kg/lt APPLICATION The prepared mortar is applied to the surface with a trowel at a maximum thickness of 2-3 mm. In cases where a smooth surface finish is desired, the mortar is allowed to draw its water, and by sprinkling water on the water-drawn mortar with a plasterer's brush, the surface is finished with a steel or wooden trowel. Large surfaces open to the atmosphere, especially hot, dry or windy environments, must be protected against rapid evaporation for 24-48 hours with wet burlap, water or special curing agents. PACKAGING 25 KG KRAFT BAG. CONSUMPTION 1.8 kg/m2 dry powder for 1 mm thickness
Category
Restoration Solutions › Historic Building Plaster Mortar
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.
Log in, you can write a review if you have purchased this product.