DESCRIPTION: OGH 1122 is a pozzolanic-lime-based, cement-free, high-strength thixotropic repair and strengthening mortar developed for historic masonry structures.
PRODUCT INFORMATION ; DESCRIPTION: OGH 1122 is a pozzolanic-lime-based, cement-free, high-strength thixotropic repair and strengthening mortar developed for historic masonry structures. AREAS OF USE •In repairing and strengthening masonry foundations, walls, plasters, domes, arches and vaults, •In wall joints, •In placing carbon rods, •In new foundation and wall construction, •In filling voids, PRODUCT FEATURES AND ADVANTAGES •Cement-free, •High bond strength, •High water vapor permeability, •Breathable. •Very easy to prepare and apply, •Sulfate resistant, •Asbestos-free, environmentally friendly, •High efflorescence resistance. APPLICATION METHOD Surface Preparation: Care must be taken to ensure that the surfaces of structures to be plastered are sound, dust-free, and clean. The surface must be thoroughly cleaned of all kinds of oil, rust, grease, and paraffin residues that would weaken adhesion. To increase the adhesion of the area to be applied and to improve the bonding and strength of the mortar to the surface The surface must be pre-dampened. Mixing The appropriate amount of water is poured into a clean mixing bucket using a measuring scale. OGH 1122 is added slowly and mixed for 10 minutes with a 400-600 rpm mixer until a homogeneous and lump-free mixture is obtained. After resting for approximately 5 minutes and mixing again for 2 minutes, the material is ready for use. MIXING RATIOS FOR 1 KG OF OGH 1122 POWDER FOR 20 KG BAG MIXING WATER AMOUNT 0.25 lt – 0.30 lt 5.0 lt – 6.0 lt MIX DENSITY 1.70 kg/m³ Application The prepared mortar is applied to the surface with a trowel at a maximum thickness of 2-3 mm. In cases where a smooth surface finish is desired, it is waited for the mortar to draw its water, and by sprinkling water on the mortar that has drawn its water using a plasterer's brush, the surface is finished with a steel or wooden trowel. Large surfaces exposed to the atmosphere, especially hot, dry or windy environments, must be protected against rapid evaporation for 24-48 hours with wet burlap, water or special curing agents. PACKAGING 20 KG KRAFT BAG. CONSUMPTION 1.8 kg/m² of powder product for 1 mm thickness SHELF LIFE 12 months from the production date under suitable storage conditions. Opened packages must be stored under suitable conditions and used within one week.
Category
Restoration Solutions › Historic Building Repair and Strengthening Mortar
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.
Log in, you can write a review if you have purchased this product.
DESCRIPTION: KAVI 1124 is a natural-hydraulic-lime-based, cement-free, high-strength thixotropic repair and strengthening mortar developed for historic masonry structures.