Home
›Restoration Solutions›Historic Building Joint Filler Mortar ›Horasan 1130 FUGA – Natural Hydraulic Lime-based J...
Horasan 1130 FUGA – Natural Hydraulic Lime-based Joint Filler Mortar
32.280,05 ₺
%0 off
Prices do not include %20 VAT; it is added at checkout.
DESCRIPTION: FUGA 1130 is a pozzolanic-lime-based, cement-free, specially graded, high-strength Horasan mortar developed specifically for historic stone wall joints.
📞 Request a quote for bulk / pallet purchases🚚 Fast Shipping
🛡️ Secure Payment
↩️ Easy Returns
PRODUCT INFORMATION ; DESCRIPTION: FUGA 1130 is a pozzolanic-lime-based, cement-free, specially graded, high-strength Horasan mortar developed specifically for historic stone wall joints. AREAS OF USE •In stone and brick wall joints, •In wide and deep joint gaps, •In pavement joints, •In repair works, PRODUCT FEATURES AND ADVANTAGES •Resistant to water and frost. •Easily adapts to different surfaces. •Cement-free. •Contains specially graded mineral-based fillers. •With strong bonding properties •Does not dust or crack. •Mechanical strengths are high. •Compatible with the historic fabric. TECHNICAL SPECIFICATIONS Structure of the Material: Pozzolanic lime, special silica aggregates, mineral fillers. Color: Available in White, Nile Beige, Red, etc. Compressive strength: M5 (28 days) Bond strength: ≥ 0.15 N/mm² Capillary water absorption: ≤0.2 kg.m⁻².h⁻⁰·⁵ Water Vapor Permeability: µ 5<20 Application thickness: 0.5-30 mm Temperature of the substrate to be applied: +5°C to +30°C Service temperature: +5°C to +40°C Pot life (+20°C): 60 min. Typical values: Obtained as a result of tests performed on 4x4x16 cm mortar prisms at +23°C and 50% relative humidity conditions. High temperatures shorten durations, low temperatures prolong them. APPLICATION METHOD Surface Preparation: Care must be taken to ensure that the surfaces of historical masonry structures to be repaired and plastered are sound. The surface must be dust-free and clean. The application surface must be thoroughly cleaned of all kinds of oil, grease, rust, etc. substances that would weaken adhesion. The surface must be pre-dampened to increase the adhesion of the area to be applied and to improve the bonding and strength of the mortar to the surface. If the surface has been wetted with a hose, excess water must be removed and the surface must only be damp; if there is active water coming from outside, the water must be drained before application, and injection materials must be waterproofed. On the application surface, there must be no active water that would prevent adhesion. PREPARATION INSTRUCTION AND MIXING The appropriate amount of water is poured into a clean bucket using a scale. FUGA 1130 OLYMPOS is added slowly and mixed with a 400-600 rpm mixer for 3-4 minutes, until a homogeneous and lump-free mixture is obtained. After resting for approximately 4-5 minutes and mixing again for 30 seconds, the material becomes ready for use. MIXING RATIOS MIXING WATER AMOUNT FOR 1 KG POWDER FOR 20 KG BAG OF FUGA 1130 WATER AMOUNT 0.14 lt – 0.0.16 lt 2.80 lt – 3.20 lt MIX DENSITY 1.70 kg/l Application The specified amount of water for 20 kg of FUGA 1130 is applied with a trowel. The mortar is allowed to dry, and it is wiped and washed lightly by dampening with a hard sponge or similar material. Thus, the pattern inside the mortar is revealed. PACKAGING 20 KG KRAFT BAG CONSUMPTION 17 kg of powder product is required to make a joint 1 m2 wide and 10 mm thick CLEANING OF TOOLS Tools and equipment used after application must be cleaned with water. FUGA 1130 can only be removed from the surface mechanically after it has hardened. SHELF LIFE 12 months from the production date under suitable storage conditions. Opened packages must be stored under suitable conditions and used within one week.
| Category | Restoration Solutions › Historic Building Joint Filler Mortar |
| Color | Gray |
| KG | 20 KG Kraft Bag |
| Option | Pallet (80 Piece Kraft Bag) |
| Technical data sheet | TDS.pdf |
| VAT rate | %20 |
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.
Log in, you can write a review if you have purchased this product.
There are no reviews for this product yet.