PRODUCT INFORMATION ; DESCRIPTION: KRISTEKS K1K 140 is a single-component, cement-based, high-performance, active hydrophobic waterproofing material. AREAS OF USE ; •In insulation of old and new buildings, in internal and external insulation of basements against ground moisture •For internal waterproofing of water tanks and reservoirs, •As moisture protection under bituminous materials, •In elevator pits without active water leakage, •Used before ceramic tiling in areas such as bathrooms, showers, and terraces, PRODUCT FEATURES; •High performance against pressurized water, •Single-component and only requires the addition of water, •Hydrophobic capillary effect on concrete surfaces, •Used for forming layers and small fillings, •Allows vapor permeability, •Has good crack-bridging capacity, •Contains no toxic substances, is hygienic, does not affect the taste of water, •Can be applied on damp surfaces, •Adjustable consistency, easy application by brush and trowel. APPLICATION METHOD : KRISTEKS K1K 140 is single-component. Pour the specified amount of water into a clean container according to the application method. Slowly pour the product onto the water while mixing with a low-speed mixer. Mix until completely homogeneous. Ensure there are no lumps. Saturate the application surface with water. Layer thickness in trowel application should not exceed 2 mm per coat. In brush application, it should not exceed 1 mm per coat. The application should be carried out in 2 coats. Drying time varies between 3 and 12 hours depending on seasonal conditions and the application area. Inter-coat applications should be performed in perpendicular directions. WATER CONTACT : Following the KRISTEKS K1K 140 application, it must fully cure before being coated or coming into contact with water. For an application carried out at +20 °C, the drying time required for ceramic tiling is approximately 4 days. For an application carried out at +10 °C, the drying time is approximately 7 days. A waiting period of 15 days is required for direct contact with water. POINTS TO NOTE ; •The surface must be free of all kinds of dirt, oil and grease, weak and loose particles, and cement laitance residues. •The tensile strength of the concrete must be greater than 1.0 N/mm². •Avoid applying a thick layer in a single pass. •Absolutely no water should be added to the mixture. •For 3 days after application, the surface must be protected from impact, drilling and scratching, and then covered. PACKAGING: 25 Kg Kraft Bag CONSUMPTION : 1,6 kg/m²/mm SHELF LIFE: 12 months from the production date in its original, undamaged and unopened packaging. STORAGE CONDITIONS : Must be stored between +5 °C and 30°C. Must be protected from freezing, moisture and direct sunlight. Pallet must be stacked on top of it. A maximum of 8 bags must be placed on top of each other. For the product's technical specifications and other information, please download the TDS document.
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.
Log in, you can write a review if you have purchased this product.