DESCRIPTION: MFA 1002 is a floor leveling screed consisting of special cements, fillers, binders and chemical admixtures that can be applied by hand or pump. It is developed to be applied at 3-30 mm thickness in a single coat.
PRODUCT INFORMATION ; DESCRIPTION: MFA 1002 is a floor leveling screed consisting of special cements, fillers, binders and chemical admixtures that can be applied by hand or pump. It is developed to be applied at 3-30 mm thickness in a single coat. These are new-generation environmentally friendly products containing superplasticizers. AREAS OF USE Developed as a floor leveling screed aimed at leveling concrete floors and smoothing their surfaces in the renovation of existing buildings and in new constructions. Used as a floor preparation material, it is compatible with adhesives and soft floor covering materials as well as wooden floor coverings. Its appearance is similar to normal concrete flooring. Color and texture differences resulting from the application technique may be observed (e.g., trowel stroke marks). It should not be used as a final floor coating. Since it does not contain casein or any other protein-based additives in its composition, the material is particularly suitable for use in hospitals and food production or storage areas. PRODUCT FEATURES It provides smooth surfaces suitable for use in commercial spaces, hospitals, schools, and residences, on which solid or engineered parquet, floating system parquet, PVC, linoleum, carpet, or ceramic tiles can be laid directly via bonding. It allows for the creation of very smooth surfaces. Under normal conditions, it can be walked on 2-4 hours after the application is completed. It combines rapid hardening and self-leveling properties with low shrinkage characteristics. TECHNICAL SPECIFICATIONS Flexural strength : > 5 N/mm² Compressive strength : > 25 N/mm² Adhesion to concrete (SS 92 35 07): > 1.5 N/mm² Free shrinkage : % 0,04 – 0, The technical values provided by the material, mixed with 19% water and kept for 28 days at a temperature of +23 0C and 50% relative humidity, are given below. APPLICATION PROPERTIES Liquid mixing time : 15 – 20 min. pH value: Approximately 11 Setting time (foot traffic) : 1 – 3 hours Setting time (final coating) : 1 – 3 days The setting times given above vary depending on temperature, relative humidity, and the moisture content of the substrate. APPLICATION METHOD Surface Preparation: Care must be taken to ensure that the surfaces to be applied are sound, load-bearing, dust-free and clean. They must be thoroughly cleaned of residues that would weaken adhesion, such as accumulated water, rust, metal shavings, grease and ice. In formwork applications, all formworks must have sufficient strength, formwork oil must definitely be applied and leakages must be prevented. The application surface must be saturated with water, but no free water should remain on the surface. Application Pour the prepared mortar into the application spot. It must be ensured that the air bubbles inside the mortar have escaped. To prevent premature drying, a curing agent may be used or prevented by appropriate methods (such as keeping wet, covering with a wet cloth). In cold weather, use protective covers or take other necessary precautions. Mixing The appropriate amount of water is emptied into a clean mixing bucket with the help of a measuring scale. 25 Kg MRM 1000 is added onto the water in the bucket and mixed for 4 minutes with a low-speed mixer until a homogeneous and lump-free mixture is obtained. MIXING RATIOS MRM 1000 FOR 1 KG POWDER FOR 25 KG BAG MIXING WATER AMOUNT 0,175 lt 4,37 lt MIXING DENSITY 1,75kg/lt CONSUMPTION Depends on the surface to be applied. 15 kg per m² for 1 cm thickness PACKAGING 25 kg kraft bag. SHELF LIFE Store in unopened original packaging in a cool, dry environment, protected from frost. Do not stack more than 8 bags on top of each other. SHELF LIFE It is 6 months from the date of production under suitable storage conditions. Opened packages should be stored under suitable storage conditions and used within one week.
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.
Log in, you can write a review if you have purchased this product.
DESCRIPTION: PAR 721 is a single-component, acrylic-based, water-based, ready-to-use primer material developed for glossy surfaces; it dulls the surface gloss, increases adhesion and improves the workability of the material to be applied over it.
DESCRIPTION: MicroFloor A 1001 MFA is a floor leveling screed consisting of special cements, fillers, binders and chemical admixtures that can be applied by hand or pump. It is developed to be applied at 1 – 5 mm thickness in a single coat.
DESCRIPTION: 1119 S200 – FLOOR SELF 200 is a cement-based, highly flowable, self-leveling special leveling screed that can be applied at 20 mm thickness.
DESCRIPTION : 1118 S50 – FLOOR SELF 50, A cement-based, high-fluidity, self-leveling special leveling screed developed for thin applicationsLOOR – SELF 50, A cement-based, high-fluidity, self-leveling special leveling screed developed for thin applications...