PRODUCT INFORMATION ; DESCRIPTION: SUPER PLUS – S1K 161 is a bitumen-rubber-based, single-component, super flexible waterproofing material. AREAS OF USE; •On plastered brick and walls, indoors and outdoors, •On terraces, basement and shear walls, •On surfaces above and below ground, •In insulation of all wet areas, •On metal, wood and OSB •In below-ground and above-ground insulation, PRODUCT FEATURES •SUPER PLUS – S1K 161 becomes resistant to rain water in a short time. •Has a strong crack-bridging property. •Does not sag on vertical surfaces, •Has strong adhesion and high flexibility. •Provides waterproofing against all kinds of water and moisture effects, •Retains its flexibility even at low temperatures, •Solvent-free, environmentally friendly. •Suitable for application with brush, trowel and airless spray gun. APPLICATION METHOD The surface must be cleaned of all kinds of dirt, oil and grease, weak and loose particles, and cement laitance residues. If there are cracks and cavities on the surface to be applied, they should be repaired with the appropriate repair mortar from DOLPHIN TH and application of SUPER PLUS – S1K 161 should be proceeded 3 days later. The surface to be insulated must be dry. It can be slightly moistened in summer. If there are water puddles or pooling, they must be removed. Prior to application, if there is an expansion joint, bond the joint tapes using the expansion joint adhesive. You can perform the application with a trowel, brush or a suitable spray equipment. POINTS TO NOTE; •Do not apply while it is raining. •Do not apply under direct sunlight. •Apply in at least 2 coats. •Always apply a primer on defective surfaces where adhesion problems may occur. •The product is ready to use, do not dilute with water under any circumstances. •Protect new applications that have not yet hardened from weather conditions such as rain and frost. Packaging : 17 Kg Bucket SHELF LIFE: 12 months from the production date in its original, undamaged and unopened packaging. STORAGE CONDITIONS : Must be stored between +5 °C and 30°C. Must be protected from freezing, moisture and direct sunlight. Pallet must be stacked on top of it. A maximum of 8 bags must be placed on top of each other. For the product's technical specifications and other information, please download the TDS document.
Category
Waterproofing Solutions › Bitumen and Rubber-Based (Positive Side)
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.
Log in, you can write a review if you have purchased this product.
DESCRIPTION: MEMBRANE – KMP 164 is a bitumen-emulsion- and solvent-based, single-component flexible waterproofing material that can be applied by brush and spray; as the solvent in it evaporates, it adheres strongly to the surface and forms a durable film layer.
DESCRIPTION: BITUMKAT – BTK 162 is a single-component rubber-bitumen emulsion, modified with special polymers for excellent adhesion strength, that forms a flexible coating on concrete structures.