PRODUCT INFORMATION ; DESCRIPTION: SUPER PLUS – S2K 160 is a bitumen-rubber-based, two-component, flexible waterproofing mortar with anti-root properties. AREAS OF USE; •On plastered brick and walls, indoors and outdoors, •On surfaces exposed to plant roots, •In green roof applications, •On terraces, basement and shear walls, •On surfaces above and below ground, •In insulation of all wet areas, •On metal, wood and OSB •In below-ground and above-ground insulation PRODUCT FEATURES; •SUPER PLUS – S2K 160 is resistant to plant roots. •With this feature, it can be used safely underground, and green areas can be created on terraces. •It becomes rain-resistant in a short time. •It has high crack flexibility. •Provides waterproofing against all kinds of water and moisture effects, •Retains its flexibility even at low temperatures, •Solvent-free, environmentally friendly. •Suitable for application with brush, trowel and airless spray gun. APPLICATION METHOD The surface must be cleaned of all kinds of dirt, oil and grease, weak and loose particles, and cement laitance residues. If there are cracks and cavities on the surface to be applied, they should be repaired with the appropriate DOLPHIN TH repair mortar, and the SUPER PLUS – S2K 160 application should be started 3 days later. The surface to be insulated must be dry. In summer, it can be slightly moistened. If there are water accumulations or puddles, they must be removed. Before application, if there are expansion joints, bond the joint tapes using expansion joint adhesive. You can apply it with a trowel, brush or suitable spraying equipment. CONSUMPTION Single coat m²/ 1 kg – If applied with mesh reinforcement, it will be 3 coats in total, so 3 kg POINTS TO NOTE; •Do not apply while it is raining. •Do not apply under direct sunlight. •Apply in at least 2 coats. • Primer application must be made on defective surfaces that may have adhesion problems. • The product is ready to use, absolutely do not dilute with water. •Protect new applications that have not yet hardened from weather conditions such as rain and frost. PACKAGING : 30 KG SET A-Component 22 kg bitumen / B-Component 8 kg powder SHELF LIFE: 12 months from the production date in its original, undamaged and unopened packaging. STORAGE CONDITIONS : Must be stored between +5 °C and 30°C. Must be protected from freezing, moisture and direct sunlight. Pallet must be stacked on top of it. A maximum of 8 bags must be placed on top of each other. For the product's technical specifications and other information, please download the TDS document.
Category
Waterproofing Solutions › Bitumen and Rubber-Based (Positive Side)
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.
Log in, you can write a review if you have purchased this product.
DESCRIPTION: MEMBRANE – KMP 164 is a bitumen-emulsion- and solvent-based, single-component flexible waterproofing material that can be applied by brush and spray; as the solvent in it evaporates, it adheres strongly to the surface and forms a durable film layer.
DESCRIPTION: BITUMKAT – BTK 162 is a single-component rubber-bitumen emulsion, modified with special polymers for excellent adhesion strength, that forms a flexible coating on concrete structures.