DESCRIPTION: TKC 100 is a ready-to-use, powder water plug that sets instantly, modified with special cements and chemical and polymer additives.
DESCRIPTION: TKC 100 is a ready-to-use, powder water plug that sets instantly, modified with special cements and chemical and polymer additives.
DESCRIPTION: KRISTEKS 101 2KS UV is a two-component super-flexible waterproofing mortar based on acrylic and cement, supported with special additives.
DESCRIPTION: KRISTEKS 111 2KT is a two-component flexible waterproofing mortar based on acrylic and cement, supported with special additives.
DESCRIPTION: KRISTEKS 120 2KY is a two-component semi-flexible waterproofing mortar based on acrylic and cement, supported with special additives.
DESCRIPTION: KRISTEKS K1K 140 is a single-component, cement-based, high-performance, active hydrophobic waterproofing material.
DESCRIPTION: CRYSTALLIZE – CRY 151 is a cement-based waterproofing material resistant to negative-side pressure; thanks to its active crystals it penetrates deeply into capillary cracks in concrete and blocks them.
DESCRIPTION: CRYSTALLIZE – C2K 152 is a two-component crystalline waterproofing mortar developed using cement and natural additives; it stops water leaks when applied from the negative side and forms an impermeable layer when applied from the positive side.
DESCRIPTION: ELEVATOR-ISO – ASN 153 is a high-performance crystalline waterproofing mortar developed using cement and natural additives for sensitive negative-side waterproofing works such as elevator pits.
DESCRIPTION: CRYSTALLIZE – CRA 154 is a crystalline waterproofing developed using cement and natural additives; it is sprinkled on the ground before concrete is poured, preventing water from the ground from damaging the concrete and thus protecting the concrete against corrosion.
DESCRIPTION: SUPER PLUS – S2K 160 is a bitumen-rubber-based, two-component, flexible waterproofing mortar with anti-root properties.
DESCRIPTION: SUPER PLUS – S1K 161 is a bitumen-rubber-based, single-component, super flexible waterproofing material.
DESCRIPTION: BITUMKAT – BTK 162 is a single-component rubber-bitumen emulsion, modified with special polymers for excellent adhesion strength, that forms a flexible coating on concrete structures.
DESCRIPTION: BITUMEN PRIMER – DBA 163 is a single-component rubber-bitumen emulsion used as a primer in waterproofing works.
DESCRIPTION: MEMBRANE – KMP 164 is a bitumen-emulsion- and solvent-based, single-component flexible waterproofing material that can be applied by brush and spray; as the solvent in it evaporates, it adheres strongly to the surface and forms a durable film layer.
DESCRIPTION: COAT – PRIMER PUR 200 is a single-component, transparent and flexible polyurethane-based primer material.
DESCRIPTION: PUR 201 is a polyurethane-based, single-component waterproofing material with high UV resistance that keeps its elastic structure even in very severe weather conditions.
DESCRIPTION: POLYURETHANE – ENJ 303 is a low-viscosity, two-component polyurethane-based injection resin that contains no CFC or solvents, forms a rigid structure when cured and is activated by water.
DESCRIPTION: POLYURETHANE – ENJ 304 is a low-viscosity, two-component polyurethane-based injection foam resin that contains no CFC or solvents, forms a flexible structure when cured and is activated by water.
DESCRIPTION: FLUID – DRZ 400 is a polysulfide- and tar-based, two-component, fully elastic joint sealant applied cold on horizontal joints, especially expansion joints.
DESCRIPTION: THICK – DRZ 401 is a polysulfide-based, two-component, fully elastic joint sealant applied cold on vertical joints, especially expansion joints.