🌐 English ▾
📞 Customer Line 24/7539 303 00 72
🌐 English ▾
Home ›Construction Chemicals›Repair Mortar ›D TH 1105 THM – Filling and Leveling Putty

D TH 1105 THM – Filling and Leveling Putty

Category: Repair Mortar
446,60 ₺
Prices do not include %20 VAT; it is added at checkout.

DESCRIPTION: THM 1105 is a very easy-to-use top-coat satin plaster and leveling putty based on cement, supported with special polymers and micronized aggregates.

KG:
Option:
📞 Request a quote for bulk / pallet purchases
🚚 Fast Shipping
🛡️ Secure Payment
↩️ Easy Returns
PRODUCT INFORMATION ; DESCRIPTION: THM 1105 is a very easy-to-use top-coat satin plaster and leveling putty based on cement, supported with special polymers and micronized aggregates. AREAS OF USE • To obtain a smooth surface before decorative plaster, • As a final coat satin plaster after rough plaster application, •In precast and raw concrete surface corrections, •In all kinds of industrial reinforced concrete structures, PRODUCT FEATURES •High adhesion. •Does not shrink. •In obtaining smooth, even surfaces, •High resistance to water. •Can be applied indoors and outdoors. •Resistant to weather conditions and frost. TECHNICAL SPECIFICATIONS Material composition: Contains special cements, synthetic additives and mineral fillers. Color: White Compressive Strength (TS EN 12190): ≥10 N/mm² (28 days) Flexural strength (28 days) (TS EN 196): ≥4 N/mm² (28 days) Adhesion (Tensile) Strength (TS EN 1542) (To concrete 28 days): ≥0,8 N/mm² Capillary water absorption (TS EN 13057): ≤0.5 kg.m⁻².h⁻⁰·⁵ Application Thickness: Maximum 1.5 mm Temperature of the substrate to be applied: +5°C to +30°C Service temperature: -20°C to +40°C Pot life (+20°C): 30 min. Walkable after (+20°C): 24 hours Full curing time (+20°C): 28 days Typical values: Obtained as a result of tests performed on 4x4x16 cm mortar prisms at +23°C and 50% relative humidity conditions. High temperatures shorten durations, low temperatures prolong them. APPLICATION METHOD Surface Preparation: Care must be taken to ensure that the cement-based surfaces of structures to be repaired or plastered are sound, load-bearing, dust-free, and clean. The surface must be thoroughly cleaned of all kinds of oil, rust, grease, and paraffin residues that would weaken adhesion. The edges of the surface formed by chipping must be cut as vertically as possible, rust on the reinforcement must be cleaned, and new reinforcement must be added if necessary. If there is water leakage on the surface, it should be drained or closed with a suitable plug. The application surface must be saturated with water, but no free water should remain on the surface. Mixing The appropriate amount of water is poured into a clean mixing bucket using a measuring scale. THM 1105 is added slowly and mixed for 4 minutes with a 400-600 rpm mixer until a homogeneous and lump-free mixture is obtained. After resting for approximately 4 minutes and mixing again for 30 seconds, the material is ready for use. MIXING RATIOS THM 1105 FOR PUTTY CONSISTENCY FOR PLASTER MIXING WATER AMOUNT FOR 1 KG 0.14 lt – 0.16 lt 0.20 lt – 0.22 lt MIXING DENSITY 1.50 kg/lt Application The prepared mortar is applied to the surface with a trowel to a maximum thickness of 1.5 mm. Due to its existing structure, it provides the opportunity to work without fatigue. Wide open to the atmosphere Surfaces, especially hot, dry or windy environments, must be protected against rapid evaporation for 24-48 hours with wet burlap, water or special curing agents. PACKAGING 20 kg polyethylene-reinforced kraft bag. CONSUMPTION 1.5 kg/m² of powder product for 1 mm thickness SHELF LIFE 12 months from the production date under suitable storage conditions. Opened packages must be stored under suitable conditions and used within one week.
CategoryConstruction Chemicals › Repair Mortar
KG20 KG Kraft Bag
OptionPiece (1 Piece), Pallet (72 Piece Kraft Bag)
Technical data sheetTDS.pdf
VAT rate%20
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.

Log in, you can write a review if you have purchased this product.

There are no reviews for this product yet.

Similar Products