🌐 English ▾
📞 Customer Line 24/7539 303 00 72
🌐 English ▾
Home ›Construction Chemicals›Repair Mortar ›D TH THI 1100 – Fine Repair Mortar

D TH THI 1100 – Fine Repair Mortar

Category: Repair Mortar
331,65 ₺
Prices do not include %20 VAT; it is added at checkout.

DESCRIPTION: D-TH I 1100 is a cement-based, hydraulic-binder fine repair mortar.

KG:
Option:
📞 Request a quote for bulk / pallet purchases
🚚 Fast Shipping
🛡️ Secure Payment
↩️ Easy Returns
PRODUCT INFORMATION ; DESCRIPTION: D-TH I 1100 is a cement-based, hydraulic-binder fine repair mortar. AREAS OF USE •Concrete, •Brick, •Raw concrete, •In the repair of old structures, •In smoothing aerated concrete, brick, exposed concrete, and plaster surfaces, •In cavities and holes up to 5 mm, PRODUCT FEATURES AND ADVANTAGES •Easy workability, •Does not shrink or crack, •High adhesion, •Can be applied indoors and outdoors, •D- TH I 1100 is a fine repair mortar that becomes ready for use when mixed with water. •D- TH I 1100 is extremely workable and has high-performance properties, •Resistant to all climatic conditions after hardening. TECHNICAL SPECIFICATIONS Material composition: Contains special cements, fibers, polymers and mineral fillers. Color: Gray Compressive strength (TS EN 12190)28. Days: 10 N/Mm² Adhesion (pull-off) strength (TS EN 1542) (to concrete, 28 days): >0.8 N/mm² Chloride ion content: ≤ 0.05% Capillary water absorption (TS EN 13057): <0.5 kg.m⁻².h⁻⁰·⁵ Application thickness: Max 5 mm Temperature of the substrate to be applied: +5°C to +30°C Service temperature: -20°C to +40°C Pot life (+20°C): 30 min. Walkable after (+20°C): 24 hours Full curing time (+20°C): 28 days Obtained at an air temperature of +20°C (±2ºC) and 50% ±5 relative humidity conditions. High temperatures shorten the durations, low temperatures extend them. The actually obtained values may vary due to conditions beyond our control. APPLICATION METHOD Surface Preparation: Care must be taken to ensure that the cement-based surfaces of structures to be repaired are sound, load-bearing, dust-free, and clean. The surface must be thoroughly cleaned of all kinds of oil, rust, grease, and paraffin residues that would weaken adhesion. The edges of the surface created by chipping should be cut as vertically as possible, rust on the reinforcement must be cleaned, and new reinforcement should be added if necessary. If there is water leakage on the surface, it should be drained or plugged with a suitable plugging mortar. The application surface must be saturated with water, but no free water should remain on the surface. Mixing: The appropriate amount of water is poured into a clean mixing bucket with the help of a measuring scale. D- TH I 1100 is added slowly and mixed with a 400-600 rpm mixer for 4 minutes until a homogeneous and lump-free mixture is obtained. After resting for approximately 4 minutes and mixing again for 30 seconds, the material is ready for use. Application The prepared mortar is applied to the surface by trowel or spraying, with a thickness between 5 mm and 40 mm in a single layer. In thicker applications, after the first layer dries, the second layer is applied to the surface in the same way. In cases where a smooth surface finish is desired, it is waited for the mortar to lose its bleed water, and the surface is finished with a steel or wooden trowel by sprinkling water on the mortar that has lost its water using a plasterer's brush. Large surfaces exposed to the atmosphere, especially hot, dry, or windy environments, must be protected against rapid evaporation for 24-48 hours with wet burlap, water, or special curing agents. CLEANING OF TOOLS Tools and equipment used after application must be cleaned with water. D- TH I 1100 can only be removed from the surface mechanically after it has hardened. CONSUMPTION 1.75 kg/m² of powder product for 1 mm thickness PACKAGING 25 kg kraft bag. SHELF LIFE 12 months from the production date under suitable storage conditions. Opened packages must be stored under suitable conditions and used within one week.
CategoryConstruction Chemicals › Repair Mortar
KG25 KG Kraft Bag
OptionPiece (1 Piece), Pallet (64 Piece Kraft Bag)
Technical data sheetTDS.pdf
VAT rate%20
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.

Log in, you can write a review if you have purchased this product.

There are no reviews for this product yet.

Similar Products