DESCRIPTION: MicroFloor RM 1000 MRM is a high-strength, self-spreading (flowable) floor repair and filling mortar developed with a combination of special cements, high-quality mineral fillers, polymer binders and new-generation functional chemical admixtures.
PRODUCT INFORMATION ; DESCRIPTION: MicroFloor RM 1000 MRM is a high-strength floor repair, patching, and grouting mortar with self-leveling (fluid) properties, developed through a combination of special cements, high-grade mineral fillers, polymer binders, and new-generation functional chemical additives. It is a system-completing product designed to perfectly rehabilitate the substrate prior to micro-concrete and self-leveling screed applications, capable of being applied in a single layer from 2 mm up to 100 mm in thickness without shrinkage (retraction). AREAS OF USE • Rapid leveling and preparation for application of damaged, worn, and pitted concrete surfaces prior to micro-concrete, self-leveling screeds, and other top-coat floor coverings, • Filling deep cracks, segregation voids, and structural cavities in concrete floors, • Filling gaps around machine foundations, fixing (grouting) elements, and in anchor manufacturing, • Eliminating elevation differences on floors and providing technical slopes (forming falls / slope screeds). • Used as a structural repair mortar in hospitals, food production, processing, and storage facilities requiring high hygiene. PRODUCT FEATURES • High Fluidity and Penetration: Easily penetrates all kinds of molds, voids, and narrow crack sections thanks to its superior fluidity performance. • High Early and Ultimate Strength: Possesses high compressive and flexural strength that does not crush or fracture under aggressive loads. • Shrinkage-Free Structure: Does not crack, shrink, or detach from the surface even in large-volume and thick applications. • Fast Curing: Allows pedestrian traffic 1 – 3 hours after application, ensuring the project continues without interruption. • Stable Matrix Structure: Does not undergo segregation or bleeding during and after the reaction. • Protein and Casein Free: Prevents the growth of mold, fungi, and bacteria as it contains no organic-based casein or protein derivatives; ideal for sterile floor substrates. HYDRATION AND LIQUID ABSORPTION PROTECTION PROTOCOL (POLISHING / SEALING) IMPORTANT TECHNICAL NOTE: MicroFloor MB 1003 MFB has a cement-based matrix structure. Due to the nature of cement, microscopic voids (micro-pores) occur on the surface during the hydration (reaction and setting) process due to the evaporation of water in the mortar.During the service stage after curing, in order to completely prevent the absorption of liquids (water, oil, coffee, chemicals, etc.) that may be spilled on the surface by these micro-pores, stain formation, and discoloration; it is mandatory to seal the surface with a suitable protective coating or polish (topcoat/sealer) system. The polish layer preserves the color vibrancy of the system permanently while providing the surface with maximum hygiene, stain resistance, and easy cleanability. TECHNICAL SPECIFICATIONS • Compressive Strength: > 25 N/mm² • Flexural Strength: > 6 N/mm² •Adhesion to concrete (SS 92 35 07): > 1.5 N/mm² • Free Shrinkage: 0.03 – 0.05 % • Mix Density: ~1.75 kg/liter • Application Thickness: 2 – 100 mm • Consumption (Powder Product): Approximately 2.0 kg of powder product is required to obtain 1 liter of fresh mortar. (Depends on the surface to be applied.) (The given values were obtained from samples mixed with 19% water and kept for 28 days at +23 °C temperature and 50% relative humidity.) APPLICATION PROPERTIES / DURATIONS •Pot Life (Liquid Mixture Time): 15 – 20 minutes •pH value: Approximately 11 •Setting Time (Foot Traffic): 1 – 3 hours •Waiting Time Before Topcoat Application: 1 – 3 days (may vary depending on ambient temperature, relative humidity, and moisture content of the substrate). APPLICATION METHODOLOGY A. Surface Preparation •Care must be taken to ensure that the substrates to be applied are sound, load-bearing, clean, and free from all kinds of dust. •Residues such as accumulated water, rust, metal shavings, formwork oils, grease, paint, and ice that would weaken adhesion must be completely cleaned from the surface. •In formwork pouring applications; the formworks must be of sufficient strength to withstand the mortar pressure, leak-tightness must be ensured, and they must be lubricated with a suitable formwork oil to prevent the mortar from sticking. •Surface Saturation with Water: Immediately before starting the application, the floor must be completely saturated with clean water, but strict attention must be paid to ensure that no free water layer (puddling) remains on the surface. B. Mixing Ratios and Procedure •Mixing Ratio: 4.37 liters of clean and cold water must be used for a 25 kg bag of MicroFloor RM 1000 MRM (0.175 liters for 1 kg of powder). •The appropriate and precisely measured amount of water is poured into a clean mixing bucket. •The powder material is slowly added onto the water and mixed continuously for 4 minutes using a low-speed (max. 400-600 rpm) mixing stirrer until a homogeneous, lump-free, and fluid mixture is obtained C. Application Method •The prepared fluid mortar is poured into the area to be applied without waiting. The mortar is allowed to self-level and fill the voids. •During the application, the mortar must be checked to ensure no air bubbles remain within the mortar and complete placement is achieved. •Curing (Prevention of Premature Drying): In order to prevent rapid evaporation of the water in the content of the mortar and the resulting crack formation; after application, the surface must be kept moist by appropriate methods (such as keeping it wet, covering with wet cloths) or an approved curing compound must be applied. •In extremely cold weather, full protection against frost must be ensured using surface protective covers and thermal blankets so that the poured mortar can set. CLEANING OF TOOLS All tools, mixers, and equipment used immediately after application should be washed with water. Hardened MicroFloor RM 1000 MRM residues can only be removed from the surface by mechanical methods. PACKAGING, STORAGE AND SHELF LIFE •Packaging: 25 kg polyethylene-reinforced kraft bag. •Storage: Store in unopened original packaging in a cool, dry and moisture-free environment, protected from frost. Stack a maximum of 8 bags on top of each other. •Shelf Life: 6 months from the date of production under specified appropriate storage conditions. Opened packages must be tightly sealed, stored under appropriate storage conditions, and consumed within 1 week.
Your orders are shipped within 1-3 business days. Shipping is free on orders of 500 ₺ and above. You can return the product within 14 days after receiving it.
Log in, you can write a review if you have purchased this product.
DESCRIPTION: MicroFloor MB 1004 MFB is formulated with a combination of special cements, high-purity mineral fillers, functional polymer binders and new generation chemical additives for floors exposed to industrial, parking and heavy traffic loads, applied by hand or pump, cement-based a...
DESCRIPTION: MicroFloor MB 1003 MFB is a cement-based flowable micro-concrete (microtopping) floor coating mortar that can be applied by hand or pump, consisting of special cements, quality mineral fillers, high-performance polymer binders and new-generation functional chemical admixtures.