DESCRIPTION: SES 1830 is a highly sound-absorbing interior plaster containing highly sound-absorbing minerals, various fibers, expanded silicates and inorganic fillers, blended with cement, modified with special polymers and reinforced with fibers.
DESCRIPTION: SES 1830 is a highly sound-absorbing interior plaster containing highly sound-absorbing minerals, various fibers, expanded silicates and inorganic fillers, blended with cement, modified with special polymers and reinforced with fibers.
DESCRIPTION: BRY 1900 is a hydraulic-binder fireproofing plaster containing special aggregates and additives resistant to fire and high temperatures.
DESCRIPTION: BORPER FLOOR – BTS 1800 is a flowable leveling screed supporting heat and sound insulation, containing cement, expanded silicates and inorganic fillers with high and special polymer additives.
DESCRIPTION: DTY 1700 is a cement-based, polymer-modified adhesive mortar used for bonding thermal insulation boards (EPS, XPS, rock wool, heat and sound insulation felt, etc.) to the surface to be insulated.
DESCRIPTION: DTY 1701 is a cement-based, polymer-modified, fiber-reinforced plaster mortar developed for plastering over thermal insulation boards (EPS, XPS, rock wool, heat and sound insulation felt, etc.).
DESCRIPTION: DTY 1702 is a cement-based, polymer-modified, fiber-reinforced adhesive and plaster mortar developed for bonding thermal insulation boards (EPS, XPS, rock wool, heat and sound insulation felt, etc.) to the substrate and plastering over them.
DESCRIPTION: DTDS 1703 is a cement-based, polymer-modified, fiber-reinforced, water-repellent fine-patterned coating material used as an exterior facade top-coat plaster.
DESCRIPTION: DTDS 1704 is a cement-based, polymer-modified, fiber-reinforced, water-repellent coating material used as an exterior facade top-coat plaster.
DESCRIPTION: DSÇ 1705 is a cement-based, polymer-modified, fiber-reinforced, water-repellent, line-patterned coating material used as an exterior facade top-coat plaster.
DESCRIPTION: Therm +3 facade coating is based on acrylic copolymer and specially modified elastomeric resin. It is a water-based, ready-to-use, brush-applied thermal and waterproofing material.
DESCRIPTION: BRY 1900 is a hydraulic-binder fireproofing plaster containing special aggregates and additives resistant to fire and high temperatures.
DESCRIPTION: SES 1830 is a highly sound-absorbing interior plaster containing highly sound-absorbing minerals, various fibers, expanded silicates and inorganic fillers, blended with cement, modified with special polymers and reinforced with fibers.
DESCRIPTION: SER 730 is a single-component, acrylic-based, water-based primer agent designed to increase surface adhesion and reduce slipperiness before tile-over-tile applications.
2220 – Vapor barrier is a three-layer barrier consisting of two polypropylene (PP) surface layers and a polyethylene (PE) functional intermediate layer positioned between these layers.
DESCRIPTION: POLYURETHANE – ENJ 304 is a low-viscosity, two-component polyurethane-based injection foam resin that contains no CFC or solvents, forms a flexible structure when cured and is activated by water.
DESCRIPTION: BORPER FLOOR – BTS 1800 is a flowable leveling screed supporting heat and sound insulation, containing cement, expanded silicates and inorganic fillers with high and special polymer additives.
DESCRIPTION: DTY 1700 is a cement-based, polymer-modified adhesive mortar used for bonding thermal insulation boards (EPS, XPS, rock wool, heat and sound insulation felt, etc.) to the surface to be insulated.
DESCRIPTION: DTDS 1703 is a cement-based, polymer-modified, fiber-reinforced, water-repellent fine-patterned coating material used as an exterior facade top-coat plaster.
DESCRIPTION: DTY 1702 is a cement-based, polymer-modified, fiber-reinforced adhesive and plaster mortar developed for bonding thermal insulation boards (EPS, XPS, rock wool, heat and sound insulation felt, etc.) to the substrate and plastering over them.
DESCRIPTION: OGH 1122 is a pozzolanic-lime-based, cement-free, high-strength thixotropic repair and strengthening mortar developed for historic masonry structures.
DESCRIPTION: SES 1830 is a highly sound-absorbing interior plaster containing highly sound-absorbing minerals, various fibers, expanded silicates and inorganic fillers, blended with cement, modified with special polymers and reinforced with fibers.
DESCRIPTION: BRY 1900 is a hydraulic-binder fireproofing plaster containing special aggregates and additives resistant to fire and high temperatures.
DESCRIPTION: BORPER FLOOR – BTS 1800 is a flowable leveling screed supporting heat and sound insulation, containing cement, expanded silicates and inorganic fillers with high and special polymer additives.
DESCRIPTION: DTY 1700 is a cement-based, polymer-modified adhesive mortar used for bonding thermal insulation boards (EPS, XPS, rock wool, heat and sound insulation felt, etc.) to the surface to be insulated.
DESCRIPTION: DTY 1701 is a cement-based, polymer-modified, fiber-reinforced plaster mortar developed for plastering over thermal insulation boards (EPS, XPS, rock wool, heat and sound insulation felt, etc.).
DESCRIPTION: DTY 1702 is a cement-based, polymer-modified, fiber-reinforced adhesive and plaster mortar developed for bonding thermal insulation boards (EPS, XPS, rock wool, heat and sound insulation felt, etc.) to the substrate and plastering over them.
DESCRIPTION: DTDS 1703 is a cement-based, polymer-modified, fiber-reinforced, water-repellent fine-patterned coating material used as an exterior facade top-coat plaster.
DESCRIPTION: DTDS 1704 is a cement-based, polymer-modified, fiber-reinforced, water-repellent coating material used as an exterior facade top-coat plaster.
DESCRIPTION: DSÇ 1705 is a cement-based, polymer-modified, fiber-reinforced, water-repellent, line-patterned coating material used as an exterior facade top-coat plaster.
DESCRIPTION: Therm +3 facade coating is based on acrylic copolymer and specially modified elastomeric resin. It is a water-based, ready-to-use, brush-applied thermal and waterproofing material.
DESCRIPTION: TKC 100 is a ready-to-use, powder water plug that sets instantly, modified with special cements and chemical and polymer additives.
DESCRIPTION: KRISTEKS 101 2KS UV is a two-component super-flexible waterproofing mortar based on acrylic and cement, supported with special additives.
DESCRIPTION: KRISTEKS 111 2KT is a two-component flexible waterproofing mortar based on acrylic and cement, supported with special additives.
DESCRIPTION: KRISTEKS 120 2KY is a two-component semi-flexible waterproofing mortar based on acrylic and cement, supported with special additives.
DESCRIPTION: KRISTEKS K1K 140 is a single-component, cement-based, high-performance, active hydrophobic waterproofing material.
DESCRIPTION: FIX 1200 is a C1T cement-based, hydraulic-binder tile and ceramic adhesive.
DESCRIPTION: DFX 1210 is a C2TE cement-based, high-performance tile adhesive with reduced slip.
DESCRIPTION: DST 1230 is a C2TE cement-based, high-performance tile adhesive with reduced slip, extended open time and increased flexibility.
DESCRIPTION: FLX 1250 is a cement-based, high-performance, S1-class flexible, versatile tile adhesive with reduced slip and extended open time.
DESCRIPTION: DGB 1260 is a cement-based, high-performance autoclaved aerated concrete adhesive that provides long and easy workability by retaining water within its structure.
DESCRIPTION: YSK 810 is a cement-based surface hardener with quartz aggregate, colored with special color pigments, developed to make floor surfaces hard and durable.
DESCRIPTION: YSK 820 is a cement-based surface hardener with corundum aggregate, colored with special color pigments, developed to make floor surfaces hard and durable.
DESCRIPTION: YKK 830 is a cement-based surface hardener with corundum aggregate, colored with special color pigments, developed to make floor surfaces hard and durable.
DESCRIPTION: MicroFloor RM 1000 MRM is a high-strength, self-spreading (flowable) floor repair and filling mortar developed with a combination of special cements, high-quality mineral fillers, polymer binders and new-generation functional chemical admixtures.
DESCRIPTION: MicroFloor A 1001 MFA is a floor leveling screed consisting of special cements, fillers, binders and chemical admixtures that can be applied by hand or pump. It is developed to be applied at 1 – 5 mm thickness in a single coat.
DESCRIPTION: BORPER FLOOR – BTS 1800 is a flowable leveling screed supporting heat and sound insulation, containing cement, expanded silicates and inorganic fillers with high and special polymer additives.
DESCRIPTION: DTY 1700 is a cement-based, polymer-modified adhesive mortar used for bonding thermal insulation boards (EPS, XPS, rock wool, heat and sound insulation felt, etc.) to the surface to be insulated.
DESCRIPTION: DTY 1701 is a cement-based, polymer-modified, fiber-reinforced plaster mortar developed for plastering over thermal insulation boards (EPS, XPS, rock wool, heat and sound insulation felt, etc.).
DESCRIPTION: DTY 1702 is a cement-based, polymer-modified, fiber-reinforced adhesive and plaster mortar developed for bonding thermal insulation boards (EPS, XPS, rock wool, heat and sound insulation felt, etc.) to the substrate and plastering over them.
DESCRIPTION: DTDS 1703 is a cement-based, polymer-modified, fiber-reinforced, water-repellent fine-patterned coating material used as an exterior facade top-coat plaster.
DESCRIPTION: HORASAN NHL 1100 is natural hydraulic lime fired at high temperatures (900-1000°) using traditional methods, for use in the production of Horasan mortar
DESCRIPTION: HORASAN INJ 1101 is an injection mortar developed for historic masonry structures, containing natural hydraulic lime, pozzolanic lime, micronized carbonates and various micronized aggregates.
DESCRIPTION: HORASAN FINE 1120 is a natural-hydraulic-lime-based fine Horasan plaster developed to obtain a smooth surface before painting.
DESCRIPTION: HORASAN THICK 1121 is a natural-hydraulic-lime-based thick plaster mortar developed for historic masonry structures.
DESCRIPTION: OGH 1122 is a pozzolanic-lime-based, cement-free, high-strength thixotropic repair and strengthening mortar developed for historic masonry structures.
DESCRIPTION: ADD 600 is a ready-to-use, hydrophobic, capillary-active, crystalline powder waterproofing concrete admixture.
Note: If you wish to buy 200 kg of this product, you can reach us via the WhatsApp shortcut.
Note: If you wish to buy 200 kg of this product, you can reach us via the WhatsApp shortcut.
Note: If you wish to buy 200 kg of this product, you can reach us via the WhatsApp shortcut.
Note: If you wish to buy 200 kg of this product, you can reach us via the WhatsApp shortcut.